C500CP131 Omron, C500CP131 Datasheet - Page 78

• Manufacturer Part Number: C500CP131
• Description: C-SERIES SPECIAL I/O UNIT
• Manufacturer: Omron

Specifications of C500CP131

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Switching the Display
Procedure
Display Modes
Ladder Diagrams with Addresses and I/O Names
Ladder Diagrams with I/O Addresses Only
72
1, 2, 3...
You can switch from addresses and I/O names, to addresses only, to I/O names
only and then back to I/O names by pressing the Ctrl+G Keys.
Up to 22 instruction lines can be input at one time in this display mode. The pro-
gram must be stored after each 22 instruction lines are input. Multiple lines are
required for OR conditions, SFT instructions, and other multiple-input instruc-
tions. Each page can display up to 5 instruction lines.
I/O names can normally be between 2 and 8 letters long, but only 5 letters are
displayed on ladder diagrams. I/O comments for I/O bits are not displayed on the
ladder diagram.
Up to 22 instruction lines can be input at one time in this display mode. The pro-
gram must be stored after each 22 instruction lines are input. Multiple lines are
required for OR conditions, SFT instructions, and other multiple-input instruc-
tions. Each page can display up to 7 instruction lines.
1. Select “H:Change display” from the main menu.
2. Select the desired display mode from the menu. The selected display mode
will appear on the screen and is indicated at the top-right of the screen.
Section 3-4