C500CP131 Omron, C500CP131 Datasheet - Page 175

• Manufacturer Part Number: C500CP131
• Description: C-SERIES SPECIAL I/O UNIT
• Manufacturer: Omron

Specifications of C500CP131

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Editing Network Support Tables
4-5-4 Retrieving I/O Tables
4-5-5 Clearing I/O Tables
4-5-6 Customizing I/O Tables
4-5-7 PC Setup
4-6
Editing Network Support Tables
1, 2, 3...
1, 2, 3...
1, 2, 3...
66 characters for the entire path name. See 6-2 File Management for more infor-
mation about directories.
“Z:Custom I/O table SIOU” is not used at present.
This operation is used to set the parameters in the PC Setup that are related to
the I/O table. These parameters include the first word allocated on the Basic
Racks, on the Slave Racks, to group-1 Slaves, to group-2 Slaves, and to I/O Ter-
minals.
During offline operation, the PC Setup is changed on the work disk only. The
data in the PC itself is not changed.
See 7-2 PC Setup for the procedure to change parameters in the PC.
To change the PC Setup in the PC, transfer them from the CVSS to the PC or
change them directly in the PC. Both of these operations are available only in
online operations. Refer to the CV Support Software Version 2: Online for de-
tails.
The following operations are used to create data link tables and to create routing
tables for SYSMAC NET and SYSMAC LINK. It is necessary to set data link
tables only when they have been set for manual setting (specific) in online oper-
ations. Routing tables are required for communication between networks. Sepa-
rate data link tables are set for SYSMAC NET and SYSMAC LINK System, but
the same routing tables are used by both Systems.
or
1. Insert the data disk containing the I/O table data into the drive.
2. Select “L:Retrieve I/O table” from the Edit I/O Table menu. Press the End
3. Press the Enter Key to retrieve the I/O table data. The I/O table editing
1. Select “C:Clear I/O table” from the Edit I/O Table menu.
2. Press the Y and Enter Keys to clear the I/O table data from the work disk.
1. Select the “A:PC setup” from the main menu.
2. Select the items to be changed from the sub-menu.
Key or Ctrl+M Keys to display the file names, select the required file name
with the cursor, and press the Enter Key.
The file name will be displayed.
screen will be displayed after the data has been retrieved.
Press the Enter Key to cancel and return to the menu.
Section 4-6
169