C500CP131 Omron, C500CP131 Datasheet - Page 240

• Manufacturer Part Number: C500CP131
• Description: C-SERIES SPECIAL I/O UNIT
• Manufacturer: Omron

Specifications of C500CP131

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

First Words for Group-3
Slaves
PC Setup
First Words for I/O Terminals The following display is used to set the first word the I/O Terminals under each
SYSMAC BUS/2
Master. If these settings are not changed, words will be allocated according to
the default setting.
To specify the first word under a Master, press the N Key and then the Enter Key
and then move the cursor to each master number and input the first word for
each Master. First words can be specified between 0000 and 2555. Be care not
to set first words so that word allocations overlap. When all the first words have
been designated, move the cursor to the confirmation area and press the Enter
key.
The first word can be set on each Slave Rack in a SYSMAC BUS or SYSMAC
BUS/2 Remote I/O System. If these settings are not changed, words will be allo-
cated according to the default setting. First, select the Remote I/O System.
To specify the first words for either Remote I/O System, specify the Master on the
following display.
To change the first words, press the N Key and then the Enter Key and then
move the cursor to each Slave unit number and input the first word for allocation
on that Slave Rack. First words can be specified between 0000 and 0999 for the
SYSMAC BUS
Section 7-2
235