C500CP131 Omron, C500CP131 Datasheet - Page 243

• Manufacturer Part Number: C500CP131
• Description: C-SERIES SPECIAL I/O UNIT
• Manufacturer: Omron

Specifications of C500CP131

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

PC Setup
Display Mode at Startup
7-2-2 Saving the PC Setup
7-2-3 Retrieving the PC Setup
238
1, 2, 3...
1, 2, 3...
Up to 2,047 records can be maintained. If too many records are set and the
boundary of a data area is exceeded, the default settings will be used. The fol-
lowing keys can be used to designate the data area of the first word:
When finished, move the cursor to the confirmation area and press the Enter
Key.
Specify the display mode that will be in effect for I/O Interface Units and SYS-
MAC BUS/2 Remote I/O Slave Units when power is turned on. The current set-
ting is displayed in parentheses.
Display Modes
The following procedure can be used to save the PC Setup from the work disk to
a data disk or the hard disk.
The first PC Setup menu will return after the file has been saved.
The following procedure can be used to retrieve the PC Setup from a data disk or
the hard disk to the work disk.
1
2
3
1. Select “S:Save PC settings” from the first PC Setup menu.
2. If a data disk is being used, place a disk in the disk drive.
3. Designate the drive and file name into which to save the PC Setup. The file
4. Input a heading for the file if desired. The heading can be up to 30 characters
1. Select “R:Retrieve PC settings” from the first PC Setup menu.
2. If a data disk is being used, place the proper disk in the disk drive.
3. Input the drive and the name of the file to be retrieved. The End Key or
F5 Key: DM Area
F6 Key: EM Area
F1 Key: Auxiliary Area
name may be up to eight characters long.
long.
Ctrl+M can be pressed to select the file name from a list of files on the speci-
fied disk.
Mode
Shows the first word allocated on the Rack.
Shows various information depending on the Unit. Refer to the
CV500/CV1000 Installation Guide or SYSMAC BUS/2 Remote
I/O System Manual for details.
Shows displays generated from the PC program with the I/O
DISPLAY instruction (IODP(189)).
F7 Key: EM bank (use after the F6 Key)
Display
Section 7-2