C500CP131 Omron, C500CP131 Datasheet - Page 160

• Manufacturer Part Number: C500CP131
• Description: C-SERIES SPECIAL I/O UNIT
• Manufacturer: Omron

Specifications of C500CP131

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Editing the Data Memory Area
4-4-4 Printing
Sample Print-out
4-4-5 HEX-ASCII
154
1, 2, 3...
for the end address (32765 when editing the EM Area), and 0000 for the fill data.
Leave these settings unchanged and press the Enter Key three times to clear
the entire DM or EM Area by writing 0000 to it.
Select the “A:HEX <-> ASCII” from the main menu to switch DM data input be-
tween hexadecimal and ASCII. The input mode changes each time this item is
selected and the current mode will be displayed at the top-right of the screen.
Input 4-digit hexadecimal value when HEX is displayed.
Input ASCII when ASCII is displayed.
1. Select “P:Print” from the DM menu.
2. Enter the print start address and the print end address then press the Enter
3. Press the Enter Key to start printing.
4. Press the Esc Key to cancel printing and return to the main menu.
Key. It is not necessary to input the leading zeros (0).
The initial values are 00000 for the start address and 24575 for the end ad-
dress (32765 when editing the EM Area). Leave these settings unchanged
and press the Enter Key twice to print the entire contents of the DM or EM
Area.
A message will be displayed during the printing operation and will disappear
when printing is complete.
All characters in the print buffer will be printed before printing stops.
Section 4-4