C500CP131 Omron, C500CP131 Datasheet - Page 13

• Manufacturer Part Number: C500CP131
• Description: C-SERIES SPECIAL I/O UNIT
• Manufacturer: Omron

Specifications of C500CP131

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Lists of Operations
Monitoring in SFC Program View or Ladder Mode
Edit DM Operations
Edit I/O Table Operations
Other Operations
6
Change Display
Monitor Interrupt
Program
All I/O Monitor
Part I/O Monitor
Online Edit
Cycle Time Read
Display Memory
Area Clear
Read DM Address
Copy
Fill
Print
HEX <–> ASCII
Switch Bank Number
Save DM
Retrieve DM
Transfer DM
Transfer I/O Table
Create I/O Table
Compare I/O Table
PC Setup
Debugging
Data Tracing
Program
Trace
Name
Name
Name
Name
Action
Instruction
Mark
Used to execute the program one step at a time or until certain conditions are met
and to display step and action status. Debugging can be stopped in progress and
monitoring operations used. Debugging operations are not supported by CVM1
PCs.
Used to trace data, display the results, and write the results to data disks.
Used to trace actions and display the results.
Used to trace instructions and display the results.
Used to trace marks and display the results.
Used to switch the display form for ladder diagrams between ladder diagrams with
I/O addresses and I/O names, ladder diagrams with I/O addresses only, ladder
diagrams with I/O names only, ladder diagrams with 2 lines of I/O comments, or
ladder diagrams with 4 lines of I/O comments.
Used to monitor I/O interrupt, scheduled interrupt, power off interrupt, and power on
interrupt programs. This operation is disabled if SFC programming is being used.
Used to monitor bits, words, timers, counters, steps, or transitions and to change bit
status or word contents using the entire screen.
Used to monitor bits, words, timers, counters, steps, or transitions and to change bit
status or word contents using the bottom third of the screen.
Used to modify the ladder-diagram portions of the program in the PC.
Used to read and display the cycle time of the PC.
Used to display the amount of user memory used and the amount remaining.
Used to delete data from the User Program Area, CPU Bus Link Area, Auxiliary
Area, Timer Area, Counter Area, DM Area, or Expansion DM Area in the PC.
Used to display DM data from the PC up to 160 words at a time. Display data can
be modified.
Used to copy DM data in the PC.
Used to write the same content to multiple DM words in the PC.
Used to print a specified area of DM from the PC.
Used to specify whether DM data is to be written in hexadecimal or ASCII.
Used to specify the Expansion DM bank in the PC (for CV1000 PCs only).
Used to save DM data from the PC to a data disk.
Used to retrieve DM data from a data disk to the PC.
Used to transfer DM data between the PC and the CVSS and compare the
contents.
Used to transfer or compare the I/O table between the work disk in the CVSS and
the PC.
Used to register in the PC the Units mounted to PC and allocate words to them.
Used to compare the actual Units mounted to PC with the I/O table in the PC.
Used to set the addresses of the first words for local Racks and for group-1,
group-2, and group-3 Slaves.
Description
Description
Description
Description
Section 1-1
56
60
68
71
77
35
52
42
42
50
52
35
54
96
97
97
97
97
98
98
99
99
92
93
94
94
Page
Page
Page
Page