C500CP131 Omron, C500CP131 Datasheet - Page 119

• Manufacturer Part Number: C500CP131
• Description: C-SERIES SPECIAL I/O UNIT
• Manufacturer: Omron

Specifications of C500CP131

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Programming in the Mnemonic Display Mode
Moving the Cursor
Main Programming Menu
3-10-1 Entering Programs
Entering Mnemonics with the Function Keys
Entering Instructions
1, 2, 3...
1, 2, 3...
Press the Up and Down Keys to move the cursor up and down the display.
Press the PgUp and PgDn Keys to display the previous and next page.
Press the End Key or Ctrl+M Keys to access the main programming menu,
which is shown below
The “I:Edit intr program” is not displayed when the program type is set to
SFC+ladder.
I/O names can be input instead of bit addresses, word addresses, or timer/
counter numbers, provided the I/O names have been allocated using the Edit I/O
name operations (see 4-1 Editing I/O Names ).
1. Select “H:Change display” from the main menu.
2. Select the mnemonic display mode from the menu.
3. Press the F1 Key to select the write editing mode. The write mode will be
1. Move the cursor to the address where the mnemonic is to be entered.
2. Input the instruction using the function key (see following table), then press
3. When an entire page of instructions has been input, press the PgDn Key to
4. Always use the check program operation as no program errors will occur if
The mnemonic display mode will be indicated along with the display mode at
the top-right of the screen.
indicated at the top-right of the screen.
the Enter Key. The instruction will be displayed at the cursor position and the
cursor will move to the next address.
display the next addresses and allow more instructions to be input.
the mnemonic program is incorrect. The program is stored as it is input.
Section 3-10
113