C500CP131 Omron, C500CP131 Datasheet - Page 169

• Manufacturer Part Number: C500CP131
• Description: C-SERIES SPECIAL I/O UNIT
• Manufacturer: Omron

Specifications of C500CP131

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Editing the I/O Table
Entering SYSMAC BUS/2 Group-1 Slaves
1, 2, 3...
3. Press the F9 Key. The unit number that is displayed is set with the switch on
4. Move the cursor to the units to be set and press the Enter Key.
5. Press the Shift+F10 and Enter Keys from the Basic Rack screen to save the
1. Move the cursor on the CPU Bus Unit display area to select a Master from
2. Create the table, as described for the Basic Racks. Unit numbers are set on
3. When all required allocations have been entered, press the Shift+F10 Keys
the CPU Bus Unit.
Units in the display are identified with the following abbreviations.
SN:
SL:
RM:
BA:
VP:
LK:
The Units that are set will appear in the CPU Bus Unit display area.
The SYSMAC BUS/2 Masters are allocated Master addresses 0 to 3 se-
quentially from the unit with the lowest unit number.
The numbers display in the table are independent from the unit numbers.
The CV Special I/O column is not used at present.
settings.
RM0 to RM3 to which group-1 Slaves are to be connected and press the F6
Key. The group-1 Slave table will be displayed.
the Units.
to return to the Basic Rack screen then press the Shift+F10 and Enter Keys
SYSMAC NET Link Unit
SYSMAC LINK Unit
SYSMAC BUS/2 Master
BASIC Unit
Personal Computer Unit
Host Link Unit
Section 4-5
163