C500CP131 Omron, C500CP131 Datasheet - Page 161

• Manufacturer Part Number: C500CP131
• Description: C-SERIES SPECIAL I/O UNIT
• Manufacturer: Omron

Specifications of C500CP131

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Editing the Data Memory Area
ASCII Table
4-4-6 Switching Memory Banks
4-4-7 Saving DM Data
1, 2, 3...
1, 2, 3...
During offline operation, only the DM Area or the EM banks can be selected.
Insert the data disk in the drive. Be sure the data disk has been formatted and is
not write-protected. DM data cannot be saved if it exceeds the free space avail-
able on the data disk.
The procedure to save DM data is described below, using the data disk as an
example.
1. Select “B:Switch Bank #” from the DM menu.
2. Press the 0 and Enter Keys to edit the EM bank 0. Numbers 1 to 7 can be
3. Press the B and Enter Keys to switch from the EM bank to the DM bank.
1. Select “S:Save DM” from the DM menu.
2. Enter the file name press the Enter Key.
3. If the input file name already exists, a message will ask if the file should be
input instead to edit the other EM banks.
Only a single EM bank can be edited at one time. To edit more than one
bank, save each edited EM bank to a data disk before editing the next EM
bank.
To enter an existing file name, press the End Key or Ctrl+M Keys to display
the current file names, select the required file name with the cursor, and
press the Enter Key.
overwritten. Press the Y and Enter Keys to overwrite the file. Press the Enter
Key to cancel and input a new file name.
The title input area will appear when the Enter Key is pressed.
Section 4-4
155