C500CP131 Omron, C500CP131 Datasheet - Page 36

• Manufacturer Part Number: C500CP131
• Description: C-SERIES SPECIAL I/O UNIT
• Manufacturer: Omron

Specifications of C500CP131

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

SFC Programming
Inputting SFC Jumps
2-5-3 Inputting Initial Steps
30
1, 2, 3...
1, 2, 3...
Input an initial step by first inputting a normal step and then changing it to an ini-
tial step. It is not possible to input an initial step directly.
or
2. Press the Enter Key to input the interrupt number currently displayed in the
1. Move the cursor to the jump source position. The jump source must be just
2. Press the Shift+F6 and Enter Keys to insert a jump at the cursor position.
3. Press the F6 key, enter the step number of the jump destination, and press
4. Move the cursor to the jump destination step and press the Shift+F6 and En-
1. Move the cursor to the required step.
2. Press the F9 Key to change the selected step to an initial step. Each time the
input area. To input a different interrupt number from that currently displayed
in the input area, press the Backspace or Home Key to delete the current
entry, input the required interrupt number, and press the Enter Key.
The interrupt number for a scheduled interrupt entry terminal must be input
as 0 or 1.
The interrupt number for an I/O interrupt entry terminal must be input in the
range 0 to 31.
A message will be displayed in the top-left corner of the screen to inform the
operator if the input interrupt number exceeds the ranges listed above.
Press the Esc Key or Shift+Esc Keys to cancel the interrupt number input.
The previously entered number will be cleared and asterisks ( ) will be dis-
played for the scheduled interrupt entry terminal or I/O interrupt entry termi-
nal.
after a transition.
the Enter Key. An I/O name can be input instead of the step number. In this
case, do not press the F6 function key. The jump destination is written to the
right of the jump.
ter Keys to insert the jump entry.
F9 Key is pressed, the designated step will toggle between a normal step
and an initial step.
Section 2-5