C500CP131 Omron, C500CP131 Datasheet - Page 223

• Manufacturer Part Number: C500CP131
• Description: C-SERIES SPECIAL I/O UNIT
• Manufacturer: Omron

Specifications of C500CP131

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

System Setup
7-1
7-1-1 Communications Mode
218
System Setup
Note If the PC is set as a CVM1, the program type must be set to ladder-only.
The following procedure should be used to check and change the operating en-
vironment of the CVSS before initial operation. This procedure can also be used
later on during operations to change the type of program, the model of PC, and
any of the other parameters as required.
To start, select “Q:System setup” from the menu. The current settings of the
CVSS operating environment will appear. Each of these parameters can be
changed as described in the following subsections.
Select “C:Comm use” from the System Setup menu. The following list of com-
munications modes will appear. To connect the computer to the tool bus port of
the PC through the CV500-CIF01, select Binary. Select ASCII to connect the
computer to the host interface port of the PC.
Dest network addr
Comm use
Program type
Memory card writer
Printer type
Prog check PC
Message #
Parameter
Specifies the PC that will be connected when the CVSS is
placed online. If the PC connected to the CVSS is in a
SYSMAC NET Link or SYSMAC LINK System, a remote PC
can be connected. If the PC has been already specified, the
PC name can be used for setting.
Specifies the communications data type for the PC and
computer to be connected. Select Binary to connect the PC’s
tool bus port and the computer using the CV500-CIF01
cable. To connect the PC’s host interface port and the
computer, select ASCII. After selecting the data type, specify
the communications mode.
Specifies whether the program is to be written in ladder
diagrams only or in SFC and ladder diagrams.
Specifies the computer’s communications port to which the
Memory Card Writer is connected.
Specifies the printer connected to the computer.
Specifies the model of PC for which the program is being
written.
Specifies the MSG(195) message number displayed on the
CVSS.
Function
Section 7-1