HD6417751RF240V Renesas Electronics America, HD6417751RF240V Datasheet - Page 524

• Manufacturer Part Number: HD6417751RF240V
• Description: MPU 1.5/3.3V 0K PB-FREE 256-QFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of HD6417751RF240V

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 240MHz
• Connectivity: EBI/EMI, FIFO, SCI, SmartCard
• Peripherals: DMA, POR, WDT
• Number Of I /o: 39
• Program Memory Type: ROMless
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 256-QFP Exposed Pad, 256-eQFP, 256-HQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

13. Bus State Controller (BSC)
Refresh: The bus state controller includes a function for controlling DRAM refreshing.
Distributed refreshing using a CAS-before-RAS cycle can be performed for DRAM by clearing
the RMODE bit to 0 and setting the RFSH bit to 1 in MCR. Self-refresh mode is also supported.
• CAS-before-RAS Refresh
Rev.4.00 Oct. 10, 2008 Page 424 of 1122
REJ09B0370-0400
H'00000000
RTCSR.CKS2–0
External bus
Refresh
request
RTCOR-1
When CAS-before-RAS refresh cycles are executed, refreshing is performed at intervals
determined by the input clock selected by bits CKS2–CKS0 in RTCSR, and the value set in
RTCOR. The value of bits CKS2–CKS0 in RTCOR should be set so as to satisfy the
specification for the DRAM refresh interval. First make the settings for RTCOR, RTCNT, and
the RMODE and RFSH bits in MCR, then make the CKS2–CKS0 setting. When the clock is
selected by CKS2–CKS0, RTCNT starts counting up from the value at that time. The RTCNT
value is constantly compared with the RTCOR value, and if the two values are the same, a
refresh request is generated and the BACK pin goes high. If this LSI external bus can be used,
CAS-before-RAS refreshing is performed. At the same time, RTCNT is cleared to zero and the
count-up is restarted. Figure 13.20 shows the operation of CAS-before-RAS refreshing.
Figure 13.21 shows the timing of the CAS-before-RAS refresh cycle.
The number of RAS assert cycles in the refresh cycle is specified by bits TRAS2–TRAS0 in
MCR. The specification of the RAS precharge time in the refresh cycle is determined by the
setting of bits TRC2–TRC0 in MCR.
RTCNT value
Refresh request cleared
by start of refresh cycle
Figure 13.20 CAS-Before-RAS Refresh Operation
= 000
≠ 000
CAS-before-RAS refresh cycle
RTCNT cleared to 0 when
RTCNT = RTCOR
Time