HD6417751RF240V Renesas Electronics America, HD6417751RF240V Datasheet - Page 197

• Manufacturer Part Number: HD6417751RF240V
• Description: MPU 1.5/3.3V 0K PB-FREE 256-QFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of HD6417751RF240V

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 240MHz
• Connectivity: EBI/EMI, FIFO, SCI, SmartCard
• Peripherals: DMA, POR, WDT
• Number Of I /o: 39
• Program Memory Type: ROMless
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 256-QFP Exposed Pad, 256-eQFP, 256-HQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

3.7.4
The UTLB address array is allocated to addresses H'F600 0000 to H'F6FF FFFF in the P4 area. An
address array access requires a 32-bit address field specification (when reading or writing) and a
32-bit data field specification (when writing). Information for selecting the entry to be accessed is
specified in the address field, and VPN, D, V, and ASID to be written to the address array are
specified in the data field.
In the address field, bits [31:24] have the value H'F6 indicating the UTLB address array, and the
entry is selected by bits [13:8]. The address array bit [7] association bit (A bit) specifies whether
or not address comparison is performed when writing to the UTLB address array.
In the data field, VPN is indicated by bits [31:10], D by bit [9], V by bit [8], and ASID by bits
[7:0].
The following three kinds of operation can be used on the UTLB address array:
1. UTLB address array read
2. UTLB address array write (non-associative)
3. UTLB address array write (associative)
Address field
Legend:
TC:
E:
VPN, D, V, and ASID are read into the data field from the UTLB entry corresponding to the
entry set in the address field. In a read, associative operation is not performed regardless of
whether the association bit specified in the address field is 1 or 0.
VPN, D, V, and ASID specified in the data field are written to the UTLB entry corresponding
to the entry set in the address field. The A bit in the address field should be cleared to 0.
Data field
Timing control bit
Entry
UTLB Address Array
31
31
1 1 1 1 0 0 1 1 1
Figure 3.15 Memory-Mapped ITLB Data Array 2
SA:
:
24
Space attribute bits
Reserved bits (0 write value, undefined read value)
23
Rev.4.00 Oct. 10, 2008 Page 97 of 1122
3. Memory Management Unit (MMU)
10
9
E
8
7
REJ09B0370-0400
4
TC
3 2
SA
0
0