DF2328BVF25V Renesas Electronics America, DF2328BVF25V Datasheet - Page 515

• Manufacturer Part Number: DF2328BVF25V
• Description: IC H8S MCU FLASH 256K 128QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2328BVF25V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 87
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• For Use With: EDK2329 - DEV EVALUATION KIT H8S/2329
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Other names: HD64F2328BVF25V

10.4
10.4.1
Operation in each mode is outlined below.
Normal Operation: Each channel has a TCNT and TGR register. TCNT performs up-counting,
and is also capable of free-running operation, synchronous counting, and external event counting.
Each TGR can be used as an input capture register or output compare register.
Synchronous Operation: When synchronous operation is designated for a channel, TCNT for
that channel performs synchronous presetting. That is, when TCNT for a channel designated for
synchronous operation is rewritten, the TCNT counters for the other channels are also rewritten at
the same time. Synchronous clearing of the TCNT counters is also possible by setting the timer
synchronization bits in TSYR for channels designated for synchronous operation.
Buffer Operation
• When TGR is an output compare register
• When TGR is an input capture register
Cascaded Operation: The channel 1 counter (TCNT1) and channel 2 counter (TCNT2), or the
channel 4 counter (TCNT4) and channel 5 counter (TCNT5), can be connected together to operate
as a 32-bit counter.
PWM Mode: In this mode, a PWM waveform is output. The output level can be set by means of
TIOR. A PWM waveform with a duty of between 0% and 100% can be output, according to the
setting of each TGR register.
Phase Counting Mode: In this mode, TCNT is incremented or decremented by detecting the
phases of two clocks input from the external clock input pins in channels 1, 2, 4, and 5. When
phase counting mode is set, the corresponding TCLK pin functions as the clock pin, and TCNT
performs up/down-counting.
This can be used for two-phase encoder pulse input.
When a compare match occurs, the value in the buffer register for the relevant channel is
transferred to TGR.
When input capture occurs, the value in TCNT is transferred to TGR and the value previously
held in TGR is transferred to the buffer register.
Operation
Overview
Rev.6.00 Sep. 27, 2007 Page 483 of 1268
Section 10 16-Bit Timer Pulse Unit (TPU)
REJ09B0220-0600