HD6412240 RENESAS [Renesas Technology Corp], HD6412240 Datasheet - Page 604

• Manufacturer Part Number: HD6412240
• Description: Renesas 16-Bit Single-Chip Microcomputer H8S Family / H8S/2200 Series
• Manufacturer: RENESAS [Renesas Technology Corp]

Section 18 Power-Down Modes
18.5
18.5.1
Module stop mode can be set for individual on-chip supporting modules.
When the corresponding MSTP bit in MSTPCR is set to 1, module operation stops at the end of
the bus cycle and a transition is made to module stop mode. The CPU continues operating
independently.
Table 18.3 shows MSTP bits and the corresponding on-chip supporting modules.
When the corresponding MSTP bit is cleared to 0, module stop mode is cleared and the module
starts operating again at the end of the bus cycle. In module stop mode, the internal states of
modules other than the SCI and A/D are retained.
After reset clearance, all modules other than DTC are in module stop mode.
When an on-chip supporting module is in module stop mode, read/write access to its registers is
disabled.
If a transition is made to sleep mode when all modules are stopped (MSTPCR = H'FFFF) or
modules other than the 8-bit timers are stopped (MSTPCR = H'EFFF), operation of the bus
controller and I/O ports is also halted, enabling current dissipation to be further reduced.
Rev.3.00 Mar. 26, 2007 Page 562 of 772
REJ09B0355-0300
Module Stop Mode
Module Stop Mode