TMPA901CMXBG Toshiba, TMPA901CMXBG Datasheet - Page 556

• Manufacturer Part Number: TMPA901CMXBG
• Description: Microcontrollers (MCU) 32-bit RISC MCU 16kb ARM926EJ 16kb 200Mhz
• Manufacturer: Toshiba

Specifications of TMPA901CMXBG

• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): -
• Rom Type: ROMless
• Ram (kbytes): 32
• Number Of Pins: 177
• Package: BGA
• Vcc: 3V
• Tft Lcd Controller: Y
• Touchscreen Controller: Y
• Usb Host Fs With Phy: Y
• Usb Device Hs With Phy: Y
• Sd Host Controller: -
• Cmos Image Sensor Interface: -
• I2s: 1
• Ssp (ch) Spi: 1
• I2mc/sio (ch): 1
• Uart/sio (ch): 2
• External Bus Interface: Y
• Cs/wait Controller (ch): 4
• Dma Controller: 8
• 10-bit Ad Converter: 4
• 12-bit Da Converter: -
• 16-bit Timer / Counter: 6
• Real Time Clock: Y
• Watchdog Timer: Y
• Osc Freq Detect: Y
• Low-power Modes: Y
• Lead Free Status / Rohs Status: Details

bmRequestType
0y00000000
Default state:
Address state:
Configured state:
(h) Set Configuration request
When wValue = 0
When wValue ≠ 0 and the wValue is a Configuration value not matching the descriptor
When wValue = 0
When wValue ≠ 0 and it is a Configuration value matching the descriptor
When wValue ≠ 0 and the wValue is a Configuration value not matching the descriptor
SET_CONFIGURATION
Keeps the address state. No register access to UDC2 is required.
Set 0y100 to bits 10-8 (Device_State) of Address-State register.
Issue the EP-Stall command to EP0.
Set 0y010 to bits 10-8 (Device_State) of Address-State register.
Issue the All-EP-Invalid command.
Issue the EP-Stall command to EP0.
Nothing is specified for the operation of devices by the USB 2.0 specifications.
When wValue ≠ 0 and the wValue is a Configuration value matching the descriptor
<For endpoints to become unused>
To this request, device configuration is set.
bRequest
<For endpoints to use>
<For endpoints to use>
Issue the EP-Invalid command to the relevant endpoints.
Set MaxPacketSize to bits 10-0 (max_pkt) of EPx_MaxPacketSize register.
Set respective values to bit 15 (pkt_mode), bit 14 (bus_sel), bit 7 (dir), bits 3-2
(t_type), and bits 1-0 (num_mf) of EPx_Status register.
Issue the EP-Reset command to the relevant endpoints.
Set MaxPacketSize to bit10-0(max_pkt) of EPx_MaxPacketSize register.
Set respective values to bit 15 (pkt_mode), bit 14 (bus_sel), bit 7 (dir), bits
Issue the EP-Reset command to the relevant endpoints.
3-2 (t_type), and bits 1-0 (num_mf) of EPx_Status register.
TMPA901CM- 555
Configuration Value
wValue
wIndex
Zero
wLength
Zero
TMPA901CM
2010-07-29
Data
None