DF2317VTE25 Renesas Electronics America, DF2317VTE25 Datasheet - Page 538

• Manufacturer Part Number: DF2317VTE25
• Description: MCU 3V 128K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2317VTE25

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 79
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2317VTE25; HD64F2317VTE25

Section 13 Smart Card Interface
Bit 2
SINV
0
1
Bit 1—Reserved: Read-only bit, always read as 1.
Bit 0—Smart Card Interface Mode Select (SMIF): Enables or disables the smart card interface
function.
Bit 0
SMIF
0
1
13.2.2
Note: * Only 0 can be written to bits 7 to 3, to clear these flags.
Bit 4 of SSR has a different function in smart card interface mode. Coupled with this, the setting
conditions for bit 2, TEND, are also different.
Bits 7 to 5—Operate in the same way as for the normal SCI. For details, see section 12.2.7, Serial
Status Register (SSR).
Bit 4—Error Signal Status (ERS): In smart card interface mode, bit 4 indicates the status of the
error signal sent back from the receiving end in transmission. Framing errors are not detected in
smart card interface mode.
Rev.7.00 Feb. 14, 2007 page 504 of 1108
REJ09B0089-0700
Bit
Initial value :
R/W
Serial Status Register (SSR)
Description
TDR contents are transmitted as they are
Receive data is stored as it is in RDR
TDR contents are inverted before being transmitted
Receive data is stored in inverted form in RDR
Description
Smart card interface function is disabled
Smart card interface function is enabled
:
:
R/(W) *
TDRE
7
1
R/(W) *
RDRF
6
0
R/(W) *
ORER
5
0
R/(W) *
ERS
4
0
R/(W) *
PER
3
0
TEND
R
2
1
MPB
R
1
0
(Initial value)
(Initial value)
MPBT
R/W
0
0