DF2317VTE25 Renesas Electronics America, DF2317VTE25 Datasheet - Page 518

• Manufacturer Part Number: DF2317VTE25
• Description: MCU 3V 128K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2317VTE25

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 79
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2317VTE25; HD64F2317VTE25

Section 12 Serial Communication Interface (SCI)
Serial data transmission (synchronous mode): Figure 12.16 shows a sample flowchart for serial
transmission.
The following procedure should be used for serial data transmission.
Rev.7.00 Feb. 14, 2007 page 484 of 1108
REJ09B0089-0700
Write transmit data to TDR and
clear TDRE flag in SSR to 0
Clear TE bit in SCR to 0
Read TDRE flag in SSR
Read TEND flag in SSR
Start of transmission
All data transmitted?
Initialization
TDRE = 1?
TEND = 1?
<End>
Figure 12.16 Sample Serial Transmission Flowchart
Yes
Yes
Yes
No
No
No
[3]
[2]
[1]
[1] SCI initialization:
[2] SCI status check and transmit data
[3] Serial transmission continuation
The TxD pin is automatically
designated as the transmit data output
pin.
write:
Read SSR and check that the TDRE
flag is set to 1, then write transmit data
to TDR and clear the TDRE flag to 0.
procedure:
To continue serial transmission, be
sure to read 1 from the TDRE flag to
confirm that writing is possible, then
write data to TDR, and then clear the
TDRE flag to 0.
Checking and clearing of the TDRE
flag is automatic when the DTC is
activated by a transmit-data-empty
interrupt (TXI) request and data is
written to TDR.