AT91RM9200-QI-002 Atmel, AT91RM9200-QI-002 Datasheet - Page 472

• Manufacturer Part Number: AT91RM9200-QI-002
• Description: IC ARM9 MCU 208 PQFP
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91RM9200-QI-002

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 180MHz
• Connectivity: EBI/EMI, Ethernet, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: POR
• Number Of I /o: 122
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: ROM
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-MQFP, 208-PQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Data Converters: -

• CKI: Receive Clock Inversion
0: The data and the Frame Sync signal are sampled on Receive Clock falling edge.
1: The data and the Frame Sync signal are shifted out on Receive Clock rising edge.
CKI does not affects the RK output clock signal.
• START: Receive Start Selection
• STTDLY: Receive Start Delay
If STTDLY is not 0, a delay of STTDLY clock cycles is inserted between the start event and the actual start of reception.
When the Receiver is programmed to start synchronously with the Transmitter, the delay is also applied.
Please Note: It is very important that STTDLY be set carefully. If STTDLY must be set, it should be done in relation to TAG
(Receive Sync Data) reception.
• PERIOD: Receive Period Divider Selection
This field selects the divider to apply to the selected Receive Clock in order to generate a new Frame Sync Signal. If 0, no
PERIOD signal is generated. If not 0, a PERIOD signal is generated each 2 x (PERIOD+1) Receive Clock.
472
0x8-0xF
START
0x0
0x1
0x2
0x3
0x4
0x5
0x6
0x7
AT91RM9200
Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data.
Transmit Start
Detection of a low level on RF input
Detection of a high level on RF input
Detection of a falling edge on RF input
Detection of a rising edge on RF input
Detection of any level change on RF input
Detection of any edge on RF input
Reserved
Receive Start
1768I–ATARM–09-Jul-09