AT91RM9200-QI-002 Atmel, AT91RM9200-QI-002 Datasheet - Page 321

• Manufacturer Part Number: AT91RM9200-QI-002
• Description: IC ARM9 MCU 208 PQFP
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91RM9200-QI-002

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 180MHz
• Connectivity: EBI/EMI, Ethernet, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: POR
• Number Of I /o: 122
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: ROM
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-MQFP, 208-PQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Data Converters: -

26. Debug Unit (DBGU)
26.1
1768I–ATARM–09-Jul-09
Overview
The Debug Unit provides a single entry point from the processor for access to all the debug
capabilities of Atmel’s ARM-based systems.
The Debug Unit features a two-pin UART that can be used for several debug and trace purposes
and offers an ideal medium for in-situ programming solutions and debug monitor communica-
tions. Moreover, the association with two Peripheral DMA Controller channels permits packet
handling for these tasks with processor time reduced to a minimum.
The Debug Unit also makes the Debug Communication Channel (DCC) signals provided by the
In-circuit Emulator of the ARM processor visible to the software. These signals indicate the sta-
tus of the DCC read and write registers and generate an interrupt to the ARM processor, making
possible the handling of the DCC under interrupt control.
Chip Identifier registers permit recognition of the device and its revision. These registers inform
as to the sizes and types of the on-chip memories, as well as the set of embedded peripherals.
Finally, the Debug Unit features a Force NTRST capability that enables the software to decide
whether to prevent access to the system via the In-circuit Emulator. This permits protection of
the code, stored in ROM.
Important features of the Debug Unit are:
• System Peripheral to Facilitate Debug of Atmel’s ARM-based Systems
• Composed of Three Functions
• Two-pin UART
• Debug Communication Channel Support
• Chip ID Registers
– Two-pin UART
– Debug Communication Channel (DCC) Support
– Chip ID Registers
– Implemented Features are 100% Compatible with the Standard Atmel USART
– Independent Receiver and Transmitter with a Common Programmable Baud Rate
– Even, Odd, Mark or Space Parity Generation
– Parity, Framing and Overrun Error Detection
– Automatic Echo, Local Loopback and Remote Loopback Channel Modes
– Interrupt Generation
– Support for Two Peripheral DMA Controller (PDC) Channels with Connection to
– Offers Visibility of COMMRX and COMMTX Signals from the ARM Processor
– Interrupt Generation
– Identification of the Device Revision, Sizes of the Embedded Memories, Set of
Generator
Receiver and Transmitter
Peripherals
AT91RM9200
321