TMPM370FYFG Toshiba, TMPM370FYFG Datasheet - Page 416

• Manufacturer Part Number: TMPM370FYFG
• Manufacturer: Toshiba

Specifications of TMPM370FYFG

• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 256K
• Rom Type: Flash
• Ram (kbytes): 10K
• Number Of Pins: 100
• Package: LQFP(14x14)
• Vcc: 5V
• Cpu Mhz: 80
• Ssp (ch) Spi: -
• I2c/sio (ch): -
• Uart/sio (ch): 4
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: N
• Cs/wait Controller (ch): -
• Dma Controller: -
• 10-bit Da Converter: -
• 10-bit Ad Converter: -
• 12-bit Ad Converter: 27
• 16-bit Timer / Counter: 8
• Motor / Igbt Control: Vector Engine
• Real Time Clock: -
• Watchdog Timer: Y
• Osc Freq Detect: Y
• Clock Gear: Y
• Low-power Hold Function: -
• Remote Control Interface: -
• Hardware Cec Controller: -
• Comparators: 4
• Low-voltage Detector: Y
• Etm Hardware Trace: 2-bit

Boot ROM
(Note 1) In I/O Interface mode, the baud rate for the transfers of the first and second bytes must be
(Note 2) In case of any negative acknowledge, the boot program returns to a state in which it
1 byte
2 byte
3 byte
4 byte
5 byte
6 byte
7 byte
8 byte
1/16 of the desired baud rate.
waits for a command code (3rd byte). In I/O Interface mode, if a communication error
occurs, a negative acknowledge does not occur.
Table 20-9 Transfer Format for the Chip and Protection Bit Erase Command
Byte
Serial operation mode and baud rate
For UART mode
Data Transferred from the Controller
For I/O Interface mode
Command code
Chip erase command code
(Wait for the next command code.)
to the TMPM370FY
⎯
⎯
⎯
⎯
TMPM370 20-24
(0x40)
0x86
0x30
(0x54)
Desired baud
rate (Note 1)
Baud rate
Data Transferred from the TMPM370FY
ACK for the serial operation mode byte
For UART mode
-Normal acknowledge
For I/O Interface mode
-Normal acknowledge
(The boot program aborts if the baud rate
can not be set correctly.)
-Communication error
ACK for the chip erase command code byte
-Normal acknowledge
-Negative acknowledge
ACK for the command code byte (Note 2)
-Normal acknowledge
-Negative acknowledge
-Communication error
ACK for the command code byte (Note 2)
-Normal acknowledge
-Negative acknowledge
Flash Memory Operation
to the Controller
⎯
⎯
⎯
⎯
TMPM370
0x86
0x30
0x4C
0xN8
0x4F
0xN8
0x40
0xN1
0x54
0xN1