TMPM370FYFG Toshiba, TMPM370FYFG Datasheet - Page 381

• Manufacturer Part Number: TMPM370FYFG
• Manufacturer: Toshiba

Specifications of TMPM370FYFG

• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 256K
• Rom Type: Flash
• Ram (kbytes): 10K
• Number Of Pins: 100
• Package: LQFP(14x14)
• Vcc: 5V
• Cpu Mhz: 80
• Ssp (ch) Spi: -
• I2c/sio (ch): -
• Uart/sio (ch): 4
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: N
• Cs/wait Controller (ch): -
• Dma Controller: -
• 10-bit Da Converter: -
• 10-bit Ad Converter: -
• 12-bit Ad Converter: 27
• 16-bit Timer / Counter: 8
• Motor / Igbt Control: Vector Engine
• Real Time Clock: -
• Watchdog Timer: Y
• Osc Freq Detect: Y
• Clock Gear: Y
• Low-power Hold Function: -
• Remote Control Interface: -
• Hardware Cec Controller: -
• Comparators: 4
• Low-voltage Detector: Y
• Etm Hardware Trace: 2-bit

・
・
(ENCLK) or software setting <SFTCAP> to 1. The captured value in <CNT23:0> is cleared to 0 on
system reset. It can also be cleared by clearing the counter via setting <ENCLR> to 1 and then
setting <SFTCAP> to 1.
counts up with fsys. The encoder counter is cleared to 0 when the encoder pulse (ENCLK) is
detected. When it has reached 0xFFFFFF, it wraps around to 0 automatically.
1. When <ZEN> = 1, the value of the encoder counter is also captured into <CNT23:0> on the Z
ENCZ edge selected by <ZESEL>.
fsys. When it has reached 0xFFFFFF, it wraps around to 0 automatically.
In Sensor Timer Count mode
In Timer mode
<CNT23:0> contains the value of the encoder counter captured by either the encoder pulse
In Sensor Timer Count mode, the encoder counter is configured as a free-running counter that
<CNT23:0> contains the value of the encoder counter captured by software setting <SFTCAP> to
In Timer mode, the encoder counter is configured as a free-running counter that counts up with
TMPM370 19-12
Encoder Input Circuit
TMPM370