SAM9RL64 Atmel Corporation, SAM9RL64 Datasheet - Page 676

• Manufacturer Part Number: SAM9RL64
• Manufacturer: Atmel Corporation

Specifications of SAM9RL64

• Flash (kbytes): 0 Kbytes
• Pin Count: 217
• Max. Operating Frequency: 240 MHz
• Cpu: ARM926
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 118
• Ext Interrupts: 118
• Usb Transceiver: 1
• Usb Speed: Hi-Speed
• Usb Interface: Device
• Spi: 1
• Twi (i2c): 2
• Uart: 5
• Ssc: 2
• Sd / Emmc: 1
• Graphic Lcd: Yes
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 6
• Adc Resolution (bits): 10
• Adc Speed (ksps): 220
• Resistive Touch Screen: Yes
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 64
• Self Program Memory: NO
• External Bus Interface: 1
• Dram Memory: sdram
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 1.08 to 1.32
• Fpu: No
• Mpu / Mmu: No / Yes
• Timers: 3
• Output Compare Channels: 3
• Input Capture Channels: 3
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

39.10 Register Configuration Guide
39.10.1
39.10.2
676
AT91SAM9R64/RL64
STN Mode Example
TFT Mode Example
Program the PIO Controller to enable LCD signals.
Enable the LCD controller clock in the Power Management Controller.
STN color(R,G,B) 320*240, 8-bit single scan, 70 frames/sec, Master clock = 60 Mhz
Data rate: 320*240*70*3/8 = 2.016 MHz
HOZVAL= ((3*320)/8) - 1
LINEVAL= 240 -1
CLKVAL = (60 MHz/ (2*2.016 MHz)) - 1= 14
LCDCON1= CLKVAL << 12
LCDCON2 = LITTLEENDIAN | SINGLESCAN | STNCOLOR | DISP8BIT| PS8BPP;
LCDTIM1 = 0;
LCDTIM2 = 10 | (10 << 21);
LCDFRMCFG = (HOZVAL << 21) | LINEVAL;
DMAFRMCFG = (7 << 24) + (320 * 240 * 8) / 32;
This example is based on the NEC TFT color LCD module NL6448BC20-08
TFT 640*480, 16-bit single scan, 60 frames/sec, pixel clock frequency = [21MHz..29MHz] with a
typical value = 25.175 MHz.
The Master clock must be (2*(n + 1))*pixel clock frequency
HOZVAL = 640 - 1
LINEVAL = 480 - 1
If Master clock is 50 MHz
CLKVAL = (50 MHz/ (2*25.175 MHz)) - 1= 0
VFP = (12 -1), VBP = (31-1), VPW = (2-1), VHDLY= (2-1)
HFP = (16-1), HBP = (48 -1), HPW= (96-1)
LCDCON1= CLKVAL << 12
LCDCON2 = LITTLEENDIAN | CLKMOD | INVERT_CLK | INVERT_LINE | INVERT_FRM |
PS16BPP | SINGLESCAN | TFT
LCDTIM1 = VFP | (VBP << 8) | (VPW << 16) | (VHDLY << 24)
LCDTIM2 = HBP | (HPW << 8) | (HFP << 21)
LCDFRMCFG = (HOZVAL << 21) | LINEVAL
DMAFRMCFG = (7 << 24) + (640 * 480* 16) / 32;
.
6289D–ATARM–3-Oct-11