Z16FMC64AG20SG Zilog, Z16FMC64AG20SG Datasheet - Page 58

• Manufacturer Part Number: Z16FMC64AG20SG
• Description: Microcontrollers (MCU) 16BIT 64K FL 4K RAM 2UART 12CH 10BIT A/D
• Manufacturer: Zilog
• Series: Z16FMCr

Specifications of Z16FMC64AG20SG

• Processor Series: Z16FMC
• Core: ZNEO
• Data Bus Width: 16 bit
• Program Memory Type: Flash
• Program Memory Size: 64 KB
• Data Ram Size: 4 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 46
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Package / Case: LQFP-64
• Development Tools By Supplier: Z16FMC28200KITG
• Minimum Operating Temperature: 0 C
• Core Processor: ZNEO
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 46
• Eeprom Size: -
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Lead Free Status / Rohs Status: Details

Low-Power Modes
STOP Mode
HALT Mode
PS028702-1210
Caution:
Z16FMC products contain advanced integrated power-saving features. Power manage-
ment functions are divided into three categories to include CPU operating modes, periph-
eral power control and programmable option bits. The highest level of power reduction is
provided through a combination of all functions.
Execution of the CPU’s
mode, the operating characteristics are:
•
•
•
•
•
•
•
To minimize current in STOP mode, all GPIO pins that are configured as digital inputs
must be driven to one of the supply rails (V
abled and WDT must be disabled. The device is brought out of STOP mode using Stop
Mode Recovery. For detailed information about Stop Mode Recovery, see the
Stop Mode Recovery
Execution of the CPU’s
onstrates the following operating characteristics:
•
•
To prevent excess current consumption when using an external clock source in
STOP Mode, the external clock must be disabled.
IPO is stopped; XIN and XOUT pins are driven to V
System clock is stopped
The CPU is stopped
Program counter (PC) stops incrementing
If enabled for operation during STOP mode, the WDT and its internal RC oscillator
continue to operate
If enabled for operation in STOP mode through the associated option bit, the VBO pro-
tection circuit continues to operate
All other on-chip peripherals are non-active
The System Clock is enabled and continues to operate
The CPU is stopped
chapter on page 29.
STOP
HALT
P R E L I M I N A R Y
instruction places the device into STOP mode. In STOP
instruction places the device into HALT mode, which dem-
DD
or V
Z16FMC Series Motor Control MCUs
SS
), the VBO protection must be dis-
SS
Product Specification
Low-Power Modes
Reset and
36