MPC8533EVTARJ Freescale Semiconductor, MPC8533EVTARJ Datasheet - Page 241

• Manufacturer Part Number: MPC8533EVTARJ
• Description: MPU POWERQUICC 783-PBGA
• Manufacturer: Freescale Semiconductor

Specifications of MPC8533EVTARJ

• Processor Type: MPC85xx PowerQUICC III 32-Bit
• Speed: 1.067GHz
• Voltage: 1V
• Mounting Type: Surface Mount
• Package / Case: 783-FCPBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -

6.10
6.10.1
Freescale Semiconductor
Reset
Reset
33–39
43–48
51–55
SPR 1008
Bits
32
40
41
42
49
50
W
W
R
R
EMCP
—
32
48
SEL_TBCLK Select time base clock. If the time base is enabled, this field functions as follows:
SLEEP
EMCP
Name
DOZE
TBEN
Hardware Implementation-Dependent Registers
NAP
—
—
—
TBEN SEL_TBCLK
Hardware Implementation-Dependent Register 0 (HID0)
MPC8533E PowerQUICC III Integrated Host Processor Family Reference Manual, Rev. 1
33
49
Figure 6-32. Hardware Implementation-Dependent Register 0 (HID0)
Enable machine check pin, MCP. Used to mask out further machine check exceptions caused by
assertion of MCP.
0 MCP is disabled.
1 MCP is enabled. If MSE[ME] = 0, asserting MCP causes checkstop. If MSR[ME] = 1, asserting MCP
Reserved, should be cleared.
Doze power management mode. If MSR[WE] is set, this bit controls DOZE mode.
0 Core not in doze mode
1 Core in doze mode
Nap power management mode. If MSR[WE] is set, this bit controls NAP mode.
0 Core not in nap mode
1 Core in nap mode
Configure for sleep power management mode. Controls SLEEP mode if MSR[WE] is set.
0 Core not in sleep mode
1 Core in sleep mode
Reserved, should be cleared.
Time base enable
0 Time base disabled (no counting)
1 Time base enabled
0 Time base is based on the processor clock
1 Time base is based on the TBCLK (RTC) input
Reserved, should be cleared.
• If HID0[TBEN] = 1 and HID0[SEL_TBCLK] = 0, the time base is updated every 8 bus clocks
• If HID0[TBEN] = 1 and HID0[SEL_TBCLK] = 1, the time base is updated on the rising edge of
causes a machine check exception.
core_tbclk (sampled at bus rate). The maximum supported frequency can be found in the electrical
specifications, but this value is approximately 25% of the bus clock frequency.
50
—
51
Table 6-18. HID0 Field Descriptions
—
39
55
EN_MAS7_UPDATE DCFA
All zeros
All zeros
DOZE
40
56
Description
NAP SLEEP
41
57
42
58
43
Access: Supervisor read/write
—
Core Register Summary
—
62
NOPTI
47
63
6-25