YLCDRSK2378 Renesas Electronics America, YLCDRSK2378 Datasheet - Page 925

• Manufacturer Part Number: YLCDRSK2378
• Description: KIT DEV EVAL H8S/2378 LCD
• Manufacturer: Renesas Electronics America
• Series: H8®r

Specifications of YLCDRSK2378

• Main Purpose: Displays, LCD Controller
• Embedded: Yes, MCU, 16-Bit
• Utilized Ic / Part: YLCDRSK2378
• Primary Attributes: 5.7" QVGA, Touch Screen
• Secondary Attributes: Source Code on CD, Debugging Requires Emulator Cable E10A USB/JTAG
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

6. Do not perform additional programming. Erase the memory before reprogramming.
7. Before programming, check that the chip is correctly mounted in the PROM programmer.
8. Do not touch the socket adapter or chip during programming.
9. Apply the reset signal after the SWE, bit is cleared during its operation.
In on-board programming, perform only one programming operation on a 128-byte
programming unit block. In programmer mode, too, perform only one programming operation
on a 128-byte programming unit block. Programming should be carried out with the entire
programming unit block erased.
Overcurrent damage to the device can result if the index marks on the PROM programmer
socket, socket adapter, and chip are not correctly aligned.
Touching either of these can cause contact faults and write errors.
The reset signal is applied at least 100 µs after the SWE bit has been cleared.
Section 20 Flash Memory (0.35-μm F-ZTAT Version)
Rev.7.00 Mar. 18, 2009 page 857 of 1136
REJ09B0109-0700