DF2367VF33 Renesas Electronics America, DF2367VF33 Datasheet - Page 117

• Manufacturer Part Number: DF2367VF33
• Description: MCU 3V 384K 128-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2367VF33

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 84
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 24K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2367VF33; HD64F2367VF33

3.1
This LSI has six operating modes (modes 1 to 5 and 7). Modes 1 to 5 and 7 are available in the
H8S/2368 0.18 μm F-ZTAT Group flash memory version. Modes 1 to 4 and 7 are available in the
H8S/2367F. Modes 1, 2, 4, and 7 are available in the masked ROM version. Modes 1 and 2 are
available in the ROMless version. The operating mode is selected by the setting of mode pins
(MD2 to MD0).
Modes 1, 2, and 4 are externally expanded modes in which the CPU can access an external
memory and peripheral devices. In the externally expanded mode, each area can be switched to 8-
bit or 16-bit address space by the bus controller. If any one of the areas is set to 16-bit address
space, the bus mode is 16 bits. If all areas are set to 8-bit address space, the bus mode is 8 bits.
Mode 7 is a single-chip activation externally expanded mode in which the CPU can switch to
access an external memory and peripheral devices at the beginning of a program execution.
Modes 3 and 5 are a boot mode/user boot mode in which the flash memory can be programmed or
erased. For details on the boot mode/user boot mode, refer to section 19, Flash Memory (0.35-μm
F-ZTAT Version), or section 20, Flash Memory (0.18-μm F-ZTAT Version).
Do not change the MD2 to MD0 pin settings during operation.
Table 3.1
MCU
Operating
Mode
1
2
3
4
5 *
7
Note:
*
Operating Mode Selection
MD2 MD1 MD0
0
0
0
1
1
1
Supported only by the H8S/2368 0.18 μm F-ZTAT Group.
MCU Operating Mode Selection
0
1
1
0
0
1
Section 3 MCU Operating Modes
1
0
1
0
1
1
CPU
Operating
Mode
Advanced
Advanced
Advanced
Advanced
Advanced
Advanced
Description
Expanded mode with on-
chip ROM disabled
Expanded mode with on-
chip ROM disabled
Boot mode
Expanded mode with on-
chip ROM enabled
User boot mode
Single-chip mode
Rev.6.00 Mar. 18, 2009 Page 57 of 980
Section 3 MCU Operating Modes
On-Chip ROM
Disabled
Disabled
Enabled
Enabled
Enabled
Enabled
REJ09B0050-0600
External Data Bus
Initial
Width
16 bits
8 bits
—
8 bits
—
—
Max.
Value
16 bits
16 bits
16 bits
16 bits
16 bits
16 bits