peb3456 Infineon Technologies Corporation, peb3456 Datasheet - Page 315

• Manufacturer Part Number: peb3456
• Description: Channelized T3 Termination With Ds3 Framer, M13 Multiplexer, T1/ E1 Framers And 256 Channel Hdlc/ppp Controller
• Manufacturer: Infineon Technologies Corporation

Reset Value
RDF
RDC
STRT
TURCOM
Test Unit Receive Command Register
Access
Address
Note: All commands are self clearing i.e. user does not have to clear command. The
CAIM
Data Sheet
15
0
maximum command rate is limited by clock rate of unit under test and the
associated synchronization process. Write interval should be > 4 transmit clock
periods e.g. 2.6 s for T1 tributary test or 634 ns for DS2 tributary test.
0
0
: write
: 2A4
: 0000
Copy Receiver’s 32 bit Pattern
This bit loads the test units internal receiver pattern to register TURFP in
fixed pattern mode. In synchrones state TURFP will be loaded with the
pattern received. In asynchronous state TURFP with a 32-bit sample of
the last received bit stream.
0
1
Copy bit counter and error counter
This bit loads the test units internal bit counter and error counter to
registers TURBC0,1 and TUREC0,1.
0
1
Clear Auxiliary Interrupt Masks.
This bit resets the internal auxililiary mask. See TURCFG.AIM.
0
1
Start Receiver.
This bit loads and starts the test unit receiver with the parameters
defined in register TURCFG.
0
H
H
(PCI), D2
No function.
Update register TURFP with synchronizer pattern.
No function.
Copy counter.
no operation
clear auxiliary interrupts
0
0
H
(Local bus)
0
0
315
0
0
0
RDF RDC CAIM STOP STRT
4
Register Description
3
2
PEB 3456 E
1
05.2001
0