8.10.00 J-TRACE ARM Segger Microcontroller Systems, 8.10.00 J-TRACE ARM Datasheet - Page 82

• Manufacturer Part Number: 8.10.00 J-TRACE ARM
• Description: JTAG EMULATOR ARM7/ARM9 ETM
• Manufacturer: Segger Microcontroller Systems
• Type: Emulatorr

Specifications of 8.10.00 J-TRACE ARM

• Contents: Emulation Module
• For Use With/related Products: ARM7, ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 899-1006

82
4.2.5
4.2.5.1 List of available commands
4.2.5.2 port
4.2.5.3 usb
J-Link / J-Trace (UM08001)
The J-Link TCP/IP Server allows using J-Link / J-Trace remotely via TCP/IP. This
enables you to connect to and fully use a J-Link / J-Trace from another computer.
Performance is just slightly (about 10%) lower than with direct USB connection.
The J-Link TCP/IP Server also accepts commands which are passed to the J-Link TCP/
IP Server via the command line.
The table below lists the commands accepted by the J-Link TCP/IP Server
Table 4.3: Available commands
Syntax
-port <Portno.>
Example
To start the J-Link TCP/IP Server listening on port 19021 the command should look
as follows:
-port 19021
Syntax
-usb <USBIndex>
Example
Currently usb 0-3 are supported, so if the J-Link TCP/IP Server should connect to the
J-Link on usb port 2 the command should look as follows:
-usb 2
port
usb
J-Link TCP/IP Server (Remote J-Link / J-Trace use)
Command
Selects the IP port on which the J-Link TCP/IP Server is
listening.
Selects a usb port for communication with J-Link.
CHAPTER 4
© 2004-2011 SEGGER Microcontroller GmbH & Co. KG
Description
J-Link and J-Trace related software