8.10.00 J-TRACE ARM Segger Microcontroller Systems, 8.10.00 J-TRACE ARM Datasheet - Page 68

• Manufacturer Part Number: 8.10.00 J-TRACE ARM
• Description: JTAG EMULATOR ARM7/ARM9 ETM
• Manufacturer: Segger Microcontroller Systems
• Type: Emulatorr

Specifications of 8.10.00 J-TRACE ARM

• Contents: Emulation Module
• For Use With/related Products: ARM7, ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 899-1006

68
3.4
3.4.1
3.4.1.1 Connecting via USB and Ethernet
J-Link / J-Trace (UM08001)
Some emulators of the J-Link family have (or future members will have) an additional
Ethernet interface, to communicate with the host system. These emulators will also
come with a built-in web server which allows configuration of the emulator via web
interface. In addition to that, you can set a default gateway for the emulator which
allows using it even in large intranets. For simplicity the setup process of J-Link Pro
(referred to as J-Link) is described in this section.
When connecting J-Link the first time, it attempts to acquire an IP address via DHCP.
To get information about which IP address is acquired, you have to possibilities:
•
•
In the following, both ways to get the IP address assigned to J-Link via DHCP, are
explained.
When using JLink.exe in order to read out the IP address, J-Link has to be con-
nected to your host system via Ethernet and via USB. When starting JLink.exe, it
will show information about the IP address (static / dynamic) when connecting to J-
Link.
To get more detailed information about the current configuration of the J-Link (such
as subnet mask and MAC address), you can use the conf command in JLink.exe.
After reading out the IP address you can connect to J-Link via Ethernet, using the IP
address.
Setting up the IP interface
Connecting J-Link via USB and via Ethernet and read out the IP address via
JLink.exe.
Connecting J-Link only via Ethernet and read out the IP via the DHCP IP Assign-
ment table of your DHCP Server.
Connecting the first time
CHAPTER 3
© 2004-2011 SEGGER Microcontroller GmbH & Co. KG
Setup