8.10.00 J-TRACE ARM Segger Microcontroller Systems, 8.10.00 J-TRACE ARM Datasheet - Page 35

• Manufacturer Part Number: 8.10.00 J-TRACE ARM
• Description: JTAG EMULATOR ARM7/ARM9 ETM
• Manufacturer: Segger Microcontroller Systems
• Type: Emulatorr

Specifications of 8.10.00 J-TRACE ARM

• Contents: Emulation Module
• For Use With/related Products: ARM7, ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 899-1006

1.3.8
1.3.8.1 Specifications
J-Link / J-Trace (UM08001)
Flasher ARM is a programming tool for microcontrollers with on-
chip or external Flash memory and ARM core. Flasher ARM is
designed for programming flash targets with the J-Flash soft-
ware or stand-alone. In addition to that Flasher ARM has all of
the J-Link functionality. For more information about Flasher
ARM, please refer to UM08007, Flasher ARM User’s Guide.
The following table gives an overview about the specifications
(general, mechanical, electrical) for Flasher ARM.
Table 1.10: Flasher ARM specifications
Supported OS
USB interface
Target interface
Power supply
Target interface voltage (V
Target supply voltage
Target supply current
LOW level input voltage (V
HIGH level input voltage (V
LOW level output voltage (V
load of 10 kOhm
HIGH level output voltage (V
load of 10 kOhm
LOW level output voltage (V
load of 10 kOhm
HIGH level output voltage (V
load of 10 kOhm
Power supply
Target interface voltage (V
Target supply voltage
Flasher ARM
For the whole target voltage range (1.8V <= V
IF
IL
IF
IH
OL
OL
)
)
)
OH
OH
JTAG Interface, Electrical
SWD Interface, Electrical
)
) with a
) with a
For 1.8V <= V
) with a
) with a
For 3.6 <= V
Mechanical
General
© 2004-2011 SEGGER Microcontroller GmbH & Co. KG
For a complete list of all operating sys-
tems which are supported, please refer
to Supported OS on page 19.
USB 2.0, full speed
JTAG/SWD 20-pin
USB powered
Max. 50mA + Target Supply current.
1.2V ... 5V
4.5V ... 5V (if powered with 5V on USB)
Max. 300mA
Max. 40% of V
Min. 60% of V
Max. 10% of V
Min. 90% of V
Max. 20% of V
Min. 80% of V
USB powered
Max. 50mA + Target Supply current.
1.2V ... 5V (SWD interface is 5V tolerant
but can output a maximum of 3.3V SWD
signals)
4.5V ... 5V (if powered with 5V on USB)
IF
IF
<= 3.6V
<= 5V
IF
IF
IF
IF
IF
IF
IF
<= 5V)
35