8.10.00 J-TRACE ARM Segger Microcontroller Systems, 8.10.00 J-TRACE ARM Datasheet - Page 169

• Manufacturer Part Number: 8.10.00 J-TRACE ARM
• Description: JTAG EMULATOR ARM7/ARM9 ETM
• Manufacturer: Segger Microcontroller Systems
• Type: Emulatorr

Specifications of 8.10.00 J-TRACE ARM

• Contents: Emulation Module
• For Use With/related Products: ARM7, ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 899-1006

7.8.5.3 Hardware watchdog
J-Link / J-Trace (UM08001)
The hardware watchdog of a STM32 device can be enabled by programming the
option bytes. If the hardware watchdog is enabled the device is reset periodically if
the watchdog timer is not refreshed and reaches 0. If the hardware watchdog is
enabled by an application which is located in flash and which does not refresh the
watchdog timer, the device can not be debugged anymore.
Disabling the hardware watchdog
In order to disable the hardware watchdog the option bytes have to be re-pro-
grammed. SEGGER offers a free command line tool which reprograms the option
bytes in order to disable the hardware watchdog. For more information about the
STM32 commander, please refer to J-Link STM32 Commander (Command line tool)
on page 81.
Note:
ing the option bytes will read-protect the flash of the STM32. The STM32 commander
will also override the read-protection of the STM32 device after disabling the watch-
dog. Please also note that unsecuring a read-protected device will cause a mass
erase of the flash memory.
In order to re-program the option bytes they have to be erased first. Eras-
© 2004-2011 SEGGER Microcontroller GmbH & Co. KG
169