S912XEP768J5MAGR Freescale Semiconductor, S912XEP768J5MAGR Datasheet - Page 717

• Manufacturer Part Number: S912XEP768J5MAGR
• Description: 16-bit Microcontrollers - MCU 16-bit 768K Flash
• Manufacturer: Freescale Semiconductor

Specifications of S912XEP768J5MAGR

• Rohs: yes
• Core: HCS12X
• Processor Series: MC9S12
• Data Bus Width: 16 bit
• Maximum Clock Frequency: 50 MHz
• Program Memory Size: 768 KB
• Data Ram Size: 48 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 3.3 V to 5 V
• Operating Temperature Range: - 40 C to + 125 C
• Package / Case: LQFP-144
• Mounting Style: SMD/SMT

To calculate the output frequency in center aligned output mode for a particular channel, take the selected
clock source frequency for the channel (A, B, SA, or SB) and divide it by twice the value in the period
register for that channel.
As an example of a center aligned output, consider the following case:
Shown in
19.4.2.7
The PWM timer also has the option of generating 8-channels of 8-bits or 4-channels of 16-bits for greater
PWM resolution. This 16-bit channel option is achieved through the concatenation of two 8-bit channels.
The PWMCTL register contains four control bits, each of which is used to concatenate a pair of PWM
channels into one 16-bit channel. Channels 6 and 7 are concatenated with the CON67 bit, channels 4 and
5 are concatenated with the CON45 bit, channels 2 and 3 are concatenated with the CON23 bit, and
channels 0 and 1 are concatenated with the CON01 bit.
When channels 6 and 7 are concatenated, channel 6 registers become the high order bytes of the double
byte channel, as shown in
registers become the high order bytes of the double byte channel. When channels 2 and 3 are concatenated,
Freescale Semiconductor
•
•
E = 100 ns
PWMx Frequency = Clock (A, B, SA, or SB) / (2*PWMPERx)
PWMx Duty Cycle (high time as a% of period):
— Polarity = 0 (PPOLx = 0)
Duty Cycle = [(PWMPERx-PWMDTYx)/PWMPERx] * 100%
— Polarity = 1 (PPOLx = 1)
Duty Cycle = [PWMDTYx / PWMPERx] * 100%
Clock Source = E, where E = 10 MHz (100 ns period)
PWMx Frequency = 10 MHz/8 = 1.25 MHz
PWMx Period = 800 ns
PWMx Duty Cycle = 3/4 *100% = 75%
Figure 19-23
PPOLx = 0
PWMPERx = 4
PWMDTYx = 1
PWM 16-Bit Functions
Change these bits only when both corresponding channels are disabled.
Figure 19-23. PWM Center Aligned Output Example Waveform
is the output waveform generated.
Figure
MC9S12XE-Family Reference Manual Rev. 1.25
19-24. Similarly, when channels 4 and 5 are concatenated, channel 4
DUTY CYCLE = 75%
PERIOD = 800 ns
NOTE
Chapter 19 Pulse-Width Modulator (S12PWM8B8CV1)
E = 100 ns
717