S912XEP768J5MAGR Freescale Semiconductor, S912XEP768J5MAGR Datasheet - Page 383

• Manufacturer Part Number: S912XEP768J5MAGR
• Description: 16-bit Microcontrollers - MCU 16-bit 768K Flash
• Manufacturer: Freescale Semiconductor

Specifications of S912XEP768J5MAGR

• Rohs: yes
• Core: HCS12X
• Processor Series: MC9S12
• Data Bus Width: 16 bit
• Maximum Clock Frequency: 50 MHz
• Program Memory Size: 768 KB
• Data Ram Size: 48 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 3.3 V to 5 V
• Operating Temperature Range: - 40 C to + 125 C
• Package / Case: LQFP-144
• Mounting Style: SMD/SMT

10.8.1.3
Operands for immediate mode instructions are included in the instruction stream and are fetched into the
instruction queue along with the rest of the 16 bit instruction. The ’#’ symbol is used to indicate an
immediate addressing mode operand. This address mode is used for semaphore instructions.
Examples:
10.8.1.4
The 4 bit wide immediate addressing mode is supported by all shift instructions.
RD = RD ∗ IMM4
Examples:
10.8.1.5
The 8 bit wide immediate addressing mode is supported by four major commands (ADD, SUB, LD, CMP).
RD = RD ∗ imm8
Examples:
10.8.1.6
The 16 bit wide immediate addressing mode is a construct to simplify assembler code. Instructions which
offer this mode are translated into two opcodes using the eight bit wide immediate addressing mode.
RD = RD ∗ IMM16
Examples:
10.8.1.7
In this addressing mode only one operand is explicitly given. This operand can either be the source (f(RD)),
the target (RD = f()), or both source and target of the operation (RD = f(RD)).
Examples:
Freescale Semiconductor
CSEM
SSEM
LSL
LSR
ADDL
SUBL
LDH
CMPL
LDW
ADD
JAL
SIF
Immediate 3-Bit Wide (IMM3)
Immediate 4 Bit Wide (IMM4)
Immediate 8 Bit Wide (IMM8)
Immediate 16 Bit Wide (IMM16)
Monadic Addressing (MON)
#1
#3
R4,#1
R4,#3
R1,#1
R2,#2
R3,#3
R4,#4
R4,#$1234
R4,#$5678
R1
R2
; Unlock semaphore 1
; Lock Semaphore 3
; R4 = R4 << 1; shift register R4 by 1 bit to the left
; R4 = R4 >> 3; shift register R4 by 3 bits to the right
; adds an 8 bit value to register R1
; subtracts an 8 bit value from register R2
; loads an 8 bit immediate into the high byte of Register R3
; compares the low byte of register R4 with an immediate value
; PC = R1, R1 = PC+2
; Trigger IRQ associated with the channel number in R2.L
MC9S12XE-Family Reference Manual Rev. 1.25
; translated to LDL R4,#$34; LDH R4,#$12
; translated to ADDL R4,#$78; ADDH R4,#$56
Chapter 10 XGATE (S12XGATEV3)
383