EVB9311 SMSC, EVB9311 Datasheet - Page 346

EVALUATION BOARD LAN9311-NU

EVB9311

Manufacturer Part Number
EVB9311
Description
EVALUATION BOARD LAN9311-NU
Manufacturer
SMSC
Series
0133r
Datasheet

Specifications of EVB9311

Main Purpose
Interface, Ethernet
Embedded
No
Utilized Ic / Part
LAN9311
Primary Attributes
2 Ports, 100BASE-TX/10BASE-T, Managed
Secondary Attributes
2 PHYs with HP Auto-MDIX, Auto- Flow Control, 32-bit CRC, MDI/MDI-X
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
638-1076
Revision 1.7 (06-29-10)
14.5.2.23
BITS
31:8
6:2
7
1
0
RESERVED
MAC Counter Test
When set, TX and RX counters that normally clear to 0 when read, will be
set to 7FFF_FFFCh when read with the exception of the
Receive Packet Length Count Register
MAC Transmit Packet Length Count Register
and
(MAC_RX_GOODPKTLEN_CNT_x)
7FFF_FF80h.
IFG Config
These bits control the transmit inter-frame gap.
IFG bit times = (IFG Config *4) + 12
Note:
TX Pad Enable
When set, packets shorter than 64 bytes are padded with zeros if needed
and a FCS is appended. Packets that are 60 bytes or less will become 64
bytes. Packets that are 61, 62, and 63 bytes will become 65, 66, and 67
bytes respectively.
TX Enable
When set, the transmit port is enabled. When cleared, the transmit port is
disabled.
Port x MAC Transmit Configuration Register (MAC_TX_CFG_x)
This read/write register configures the transmit packet parameters of the port.
Port x MAC Receive Good Packet Length Count Register
IFG Config values less than 15 are unsupported.
Register #:
Port0: 0440h
Port1: 0840h
Port2: 0C40h
DESCRIPTION
counters which will be set to
DATASHEET
(MAC_RX_PKTLEN_CNT_x),
346
(MAC_TX_PKTLEN_CNT_x),
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Size:
Port x MAC
32 bits
Port x
TYPE
R/W
R/W
R/W
R/W
SMSC LAN9311/LAN9311i
RO
DEFAULT
10101b
Datasheet
0b
1b
1b
-

Related parts for EVB9311