EVB9311 SMSC, EVB9311 Datasheet - Page 227

• Manufacturer Part Number: EVB9311
• Description: EVALUATION BOARD LAN9311-NU
• Manufacturer: SMSC
• Series: 0133r

Specifications of EVB9311

• Main Purpose: Interface, Ethernet
• Embedded: No
• Utilized Ic / Part: LAN9311
• Primary Attributes: 2 Ports, 100BASE-TX/10BASE-T, Managed
• Secondary Attributes: 2 PHYs with HP Auto-MDIX, Auto- Flow Control, 32-bit CRC, MDI/MDI-X
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 638-1076

Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Datasheet
SMSC LAN9311/LAN9311i
14.2.5.23
31:25
BITS
15:9
24
23
22
21
20
19
18
17
16
8
7
6
5
4
RESERVED
1588 Port 2 RX Interrupt Enable (1588_PORT2_RX_EN)
1588 Port 2 TX Interrupt Enable (1588_PORT2_TX_EN)
1588 Port 1 RX Interrupt Enable (1588_PORT1_RX_EN)
1588 Port 1 TX Interrupt Enable (1588_PORT1_TX_EN)
1588 Port 0(Host MAC) RX Interrupt Enable (1588_MII_RX_EN)
1588 Port 0(Host MAC) TX Interrupt Enable (1588_MII_TX_EN)
GPIO9 1588 Interrupt Enable (1588_GPIO9_EN)
GPIO8 1588 Interrupt Enable (1588_GPIO8_EN)
1588 Timer Interrupt Enable (1588_TIMER_EN)
RESERVED
1588 Port 2 RX Interrupt (1588_PORT2_RX_INT)
This interrupt indicates that a packet received by Port 2 matches the
configured PTP packet and the 1588 clock was captured.
1588 Port 2 TX Interrupt (1588_PORT2_TX_INT)
This interrupt indicates that a packet transmitted by Port 2 matches the
configured PTP packet and the 1588 clock was captured.
1588 Port 1 RX Interrupt (1588_PORT1_RX_INT)
This interrupt indicates that a packet received by Port 1 matches the
configured PTP packet and the 1588 clock was captured.
1588 Port 1 TX Interrupt (1588_PORT1_TX_INT)
This interrupt indicates that a packet transmitted by Port 1 matches the
configured PTP packet and the 1588 clock was captured.
1588 Port 0(Host MAC) RX Interrupt (1588_MII_RX_INT)
This interrupt indicates that a packet from the switch fabric to the Host MAC
the matches the configured PTP packet and the 1588 clock was captured.
Note:
1588 Interrupt Status and Enable Register (1588_INT_STS_EN)
This read/write register contains the IEEE 1588 interrupt status and enable bits.
Writing a 1 to any of the interrupt status bits acknowledges and clears the interrupt. If enabled, these
interrupt bits are cascaded into bit 29 (1588_EVNT) of the
a 1 to any of the interrupt enable bits will enable the corresponding interrupt as a source. Status bits
will still reflect the status of the interrupt source regardless of whether the source is enabled as an
interrupt in this register. Bit 29 (1588_EVNT_EN) of the
be set in order for an actual system level interrupt to occur. Refer to
on page 49
For Port 0, receive is defined as data from the switch fabric, while
transmit is to the switch fabric.
Offset:
for additional information.
198h
DESCRIPTION
DATASHEET
227
Size:
Interrupt Enable Register (INT_EN)
Interrupt Status Register
32 bits
Chapter 5, "System Interrupts,"
TYPE
R/WC
R/WC
R/WC
R/WC
R/WC
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
RO
RO
Revision 1.7 (06-29-10)
(INT_STS). Writing
DEFAULT
must also
0b
0b
0b
0b
0b
0b
0b
0b
0b
0b
0b
0b
0b
0b
-
-