EP9302-CQZ Cirrus Logic Inc, EP9302-CQZ Datasheet - Page 497

• Manufacturer Part Number: EP9302-CQZ
• Description: IC ARM9 SOC PROCESSOR 208LQFP
• Manufacturer: Cirrus Logic Inc
• Series: EP9r

Specifications of EP9302-CQZ

• Program Memory Type: ROMless
• Package / Case: 208-LQFP
• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, Ethernet, I²C, IrDA, SPI, UART/USART, USB
• Peripherals: AC'97, DMA, I&sup2:S, LED, MaverickKey, POR, PWM, WDT
• Number Of I /o: 19
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Data Converters: A/D 5x12b
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Processor Series: EP93xx
• Core: ARM920T
• Data Bus Width: 32 bit
• Data Ram Size: 16 bit
• Interface Type: USB, USART, SPI
• Maximum Clock Frequency: 200 MHz
• Number Of Programmable I/os: 37
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: EDB9302A-Z
• Controller Family/series: (ARM9)
• No. Of I/o's: 19
• Ram Memory Size: 16MB
• Cpu Speed: 200MHz
• No. Of Timers: 4
• Embedded Interface Type: AC97, I2S, SPI, UART, USB
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 598-1132 - KIT DEVELOPMENT EP9302 ARM9
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 598-1137

DS785UM1
13.1 Introduction
13.2 Booting from SyncROM or SyncFLASH
The SDRAM controller provides a high speed memory interface to single-data-rate SDRAMs,
Synchronous FLASH, and Synchronous ROMs.
The key features of the SDRAM controller are:
During power-on reset, if the values on the processor pins shown in
either a Synchronous ROM device or Synchronous FLASH device to be used for booting up
the processor, a short configuration sequence is activated and completed before the
processor is released from power-on reset. By default, Synchronous Memory Bank 3,
controlled by device configuration register SDRAMDevCfg[3:0], is used for booting.
For a Synchronous ROM device, the configuration sequence writes RAS = 0x2 and CAS =
0x5 to the SDRAMDevCfg[3:0] register and writes RAS = 0x2, CAS = 0x5, and either Burst
Note: In the EP9301 and 9302 processors, the common address/data bus is 16-bits wide
Note: In the EP9307, EP9312, and EP9315 processors, the common address/data bus is
• Raster DMA input port for high-bandwidth display refreshing.
• Up to four synchronous memory banks that can be independently configured
• Special configuration bits for Synchronous ROM operation
• Ability to program Synchronous FLASH devices using write and erase commands
• Data is transferred between the controller and the synchronous memory device in quad-
• Programmable for 16 or 32-bit data bus: EP9307, EP9312, and EP9315 processors only
• SDRAM contents are preserved when a “soft” reset is asserted
• Power saving synchronous memory clock enable
word bursts.
13SDRAM, SyncROM, and SyncFLASH Controller
and the SDRAM, SyncROM, and SyncFLASH synchronous memory controller
supports 16-bit and 8-bit devices.
programmable to be either 16-bits or 32-bits wide and the SDRAM, SyncROM, and
SyncFLASH synchronous memory controller supports 32-bit , 16-bit, and 8-bit
devices.
Copyright 2007 Cirrus Logic
Table CAUTION:
Chapter 13
select
13-1
13