EP9302-CQZ Cirrus Logic Inc, EP9302-CQZ Datasheet - Page 43

• Manufacturer Part Number: EP9302-CQZ
• Description: IC ARM9 SOC PROCESSOR 208LQFP
• Manufacturer: Cirrus Logic Inc
• Series: EP9r

Specifications of EP9302-CQZ

• Program Memory Type: ROMless
• Package / Case: 208-LQFP
• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, Ethernet, I²C, IrDA, SPI, UART/USART, USB
• Peripherals: AC'97, DMA, I&sup2:S, LED, MaverickKey, POR, PWM, WDT
• Number Of I /o: 19
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Data Converters: A/D 5x12b
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Processor Series: EP93xx
• Core: ARM920T
• Data Bus Width: 32 bit
• Data Ram Size: 16 bit
• Interface Type: USB, USART, SPI
• Maximum Clock Frequency: 200 MHz
• Number Of Programmable I/os: 37
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: EDB9302A-Z
• Controller Family/series: (ARM9)
• No. Of I/o's: 19
• Ram Memory Size: 16MB
• Cpu Speed: 200MHz
• No. Of Timers: 4
• Embedded Interface Type: AC97, I2S, SPI, UART, USB
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 598-1132 - KIT DEVELOPMENT EP9302 ARM9
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 598-1137

DS785UM1
2.2.3.2.3
2.2.3.3.1
2.2.3.3 Cache and Write Buffer
Enabling the MMU allows system memory control, but is also required if the Data Cache and
the Write Buffer are to be used. Features are enabled for specific memory regions, as defined
in the system page table. MMU enablement is done via CP15 register 1. The procedure is as
follows:
Cache configuration is 64-way set associative. There is a 16 kbyte instruction cache and a 16
kbyte data cache. The caches have the following characteristics:
1. Program the Translation Table Base (TTB) and domain access control registers
2. Create level 1 and level 2 pages for the system, and enable the Data Cache and the
3. Enable the MMU via bit 0 of CP15 register 1.
• 8 words per line, with 1 valid bit and 2 dirty bits per line to allow half-line write-backs
• Write-through or write-back capability, selectable per memory region defined by the
• Pseudo random or round robin replacement algorithms for cache misses. This is
• Independent cache lock-down with granularity of 1/64th of total cache size or 256 bytes
• For compatibility with Windows CE and to reduce latency, physical addresses for data
• The Write Buffer has a depth of 16 data words. If enabled, writes are sent to the Write
• At reset, the Instruction Cache is disabled
• A write to bit 12 of CP15 register 1 will enable or disable the Instruction Cache. If the
• If the I-Cache is disabled, current contents are ignored. If re-enabled before a reset,
MMU
determined by the RR bit (bit 14) in CP15 register 1. On a cache miss (instruction or data
not in the respective cache), an 8-word line is fetched from memory and loaded into the
cache
for both instructions and data. Lock-down of the cache will prevent an eight-word cache
line fill into that region of the cache
cache entries are stored in the PA TAG RAM, which is used for cache line write-back
operations without need of the MMU. This prevents a possible TLB miss that would
degrade performance
Buffer directly from the Data Cache or from the CPU (in the event of a cache miss or if
the cache is not enabled).
Instruction Cache (I-Cache) is enabled without the MMU enabled, all accesses are
treated as cacheable
contents will be unchanged, but may not be coherent with eternal memory. If so,
contents must be flushed before re-enabling.
Write Buffer
MMU Enable
Instruction Cache Enable
Copyright 2007 Cirrus Logic
ARM920T Core and Advanced High-Speed Bus (AHB)
EP93xx User’s Guide
2-5
2