AM79C978A AMD [Advanced Micro Devices], AM79C978A Datasheet - Page 235

• Manufacturer Part Number: AM79C978A
• Description: Single-Chip 1/10 Mbps PCI Home Networking Controller
• Manufacturer: AMD [Advanced Micro Devices]

Alternative Method for
Initialization
The controller may be initialized by performing I/O
writes only. That is, data can be written directly to the
appropriate control and status registers (CSR instead
of reading from the initialization block in memory). The
registers that must be written are shown in Table A-1.
Notes:
1. The INIT bit must not be set or the initialization block will be accessed instead.
2. Needed only if SSIZE32 =0.
3. Needed only if the physical address is different from the one stored in EEPROM or if there is no EEPROM present.
APPENDIX A
Control and Status Register
Table A-1. Registers for Alternative Initialization Method (Note 1)
CSR24-25
CSR30-31
CSR10
CSR11
CSR12
CSR13
CSR14
CSR15
CSR47
CSR49
CSR76
CSR78
CSR2
CSR8
CSR9
Am79C978A
These register writes are followed by writing the START
bit in CSR0.
PADR[31:16] (Note 3)
PADR[47:32] (Note 3)
IADR[31:16] (Note 2)
PADR[15:0] (Note 3)
LADRF[31:16]
LADRF[47:32]
LADRF[63:48]
LADRF[15:0]
RXPOLLINT
TXPOLLINT
Comment
RCVRL
XMTRL
MODE
BADR
BADX
A-1