DF2110BVTE10 Renesas Electronics America, DF2110BVTE10 Datasheet - Page 244

• Manufacturer Part Number: DF2110BVTE10
• Description: MCU 3V 64K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2110BVTE10

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 10MHz
• Connectivity: Host Interface (LPC), I²C, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 82
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Data Converters: -
• Other names: HD64F2110BVTE10; HD64F2110BVTE10

Section 10 8-Bit Timer (TMR)
10.9.5
TCNT may increment erroneously when the internal clock is switched over. Table 10.7 shows the
relationship between the timing at which the internal clock is switched (by writing to the CKS1
and CKS0 bits) and the TCNT operation.
When the TCNT clock is generated from an internal clock, the falling edge of the internal clock
pulse is detected. If clock switching causes a change from high to low level, as shown in no. 3 in
table 10.7, a TCNT clock pulse is generated on the assumption that the switchover is a falling
edge, and TCNT is incremented.
Erroneous incrementation can also happen when switching between internal and external clocks.
Table 10.7 Switching of Internal Clocks and TCNT Operation
No.
1
2
Rev. 2.00 Mar 21, 2006 page 204 of 518
REJ09B0299-0200
Timing of Switchover
by Means of CKS1
and CKS0 Bits
Clock switching from low to
low level *
Clock switching from low to
high level
Switching of Internal Clocks and TCNT Operation
1
2
TCNT Clock Operation
Clock before
switchover
Clock after
switchover
TCNT
clock
TCNT
Clock before
switchover
Clock after
switchover
TCNT
clock
TCNT
N
N
CKS bit rewrite
N + 1
CKS bit rewrite
N + 1
N + 2