D6417760BP200ADV Renesas Electronics America, D6417760BP200ADV Datasheet - Page 1018

• Manufacturer Part Number: D6417760BP200ADV
• Description: IC SUPER H MPU ROMLESS 256BGA
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of D6417760BP200ADV

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: Audio Codec, CAN, EBI/EMI, FIFO, I²C, MFI, MMC, SCI, Serial Sound, SIM, SPI, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 69
• Program Memory Type: ROMless
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

25.5.6
It is possible to stop the supply of clock to the HAC using the CSTP15 and CSTP16 bits in
CLKSTP00, which is a register used in power-down modes.
To cancel module standby mode and resume the supply of clock to the HAC, write 1 to the
corresponding bits in CLKSTPCLR00. It enables all accesses to the HAC.
To place the HAC into the power-down mode, take the following steps:
1. Check that all data transfers have ended. Also check that the transmit buffer is empty and the
2. Disable all DMA requests and interrupt requests.
3. Place the codec into power-down mode.
4. Write 1 to the CSTP15 and CSTP16 bits in CLKSTP00.
25.5.7
The HAC_SYNC signal is generated by the HAC to indicate the position of slot 0 within a frame.
When using two channels of the HAC simultaneously, connect the HAC_RES pin to the reset pins
on both of the connected codecs.
25.5.8
AC'97 Component Specification, Revision 2.1
Rev. 2.00 Feb. 12, 2010 Page 934 of 1330
REJ09B0554-0200
receive buffer has been read out to be empty.
Power-Down Mode
Notes
Reference