DF61657CN35FTV Renesas Electronics America, DF61657CN35FTV Datasheet - Page 357

• Manufacturer Part Number: DF61657CN35FTV
• Description: IC H8SX/1657 MCU FLASH 120TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8SX/1600r

Specifications of DF61657CN35FTV

• Core Processor: H8SX
• Core Size: 32-Bit
• Speed: 35MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 82
• Program Memory Size: 768KB (768K x 8)
• Program Memory Type: FLASH
• Ram Size: 24K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 120-TQFP, 120-VQFP
• For Use With: 3DK1657 - DEV EVAL KIT FOR H8SX/1657
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

8.5.7
Setting the CHNE bit in MRB to 1 enables a number of data transfers to be performed
consecutively in response to a single transfer request. Setting the CHNE and CHNS bits in MRB
set to 1 enables a chain transfer only when the transfer counter reaches 0. SAR, DAR, CRA, CRB,
MRA, and MRB, which define data transfers, can be set independently. Figure 8.10 shows the
chain transfer operation.
In the case of transfer with CHNE set to 1, an interrupt request to the CPU is not generated at the
end of the specified number of transfers or by setting the DISEL bit to 1, and the interrupt source
flag for the activation source and DTCER are not affected.
In repeat transfer mode, setting the RCHNE bit in DTCCR and the CHNE and CHNS bits in MRB
to 1 enables a chain transfer after transfer with transfer counter = 1 has been completed.
Chain Transfer
SAR
(When Transfer Destination is Specified as Block Area)
Figure 8.9 Memory Map in Block Transfer Mode
Transfer source data area
Nth block
1st block
:
:
:
Transfer
Transfer destination data area
(specified as block area)
Block area
Section 8 Data Transfer Controller (DTC)
Rev. 2.00 Jun. 28, 2007 Page 331 of 864
DAR
REJ09B0341-0200