CS1D-DPL02D Omron, CS1D-DPL02D Datasheet - Page 606

• Manufacturer Part Number: CS1D-DPL02D
• Description: CS1D Dual IO Exp
• Manufacturer: Omron

Specifications of CS1D-DPL02D

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Precautions in Replacing CS1-H PLCs with CS1D PLCs
File
mem-
ory
opera-
tions
User-customizable switch
Automatic transfer
at startup
Files required for
automatic transfer
at startup
File memory read/
write instructions
Simple backup
operation
User program
overwrite during
operation
EM file memory
settings
Item
Must be performed on the
active CPU Unit. The results
will be automatically trans-
ferred to the standby CPU
Unit.
Both program file (.obj) and
parameter file (.std) must be
transferred.
File memory instructions for
EM file memory will be exe-
cuted on both the standby
and active CPU Units. File
memory instructions for Mem-
ory Cards will be executed
only for the active CPU Unit. If
Memory Card duplex opera-
tion is enabled in the PLC
Setup, however, write opera-
tions will be executed for both
the active and standby CPU
Units.
Simple backup operations are
executed for the Memory
Card in the active CPU Unit.
There is no need to place a
Memory Card in the standby
CPU Unit.
Depends on PLC Setup set-
tings. (The specified portion
of the EM Areas will be con-
verted to file memory on both
the standby and active CPU
Units.)
The “A39512” switch on the
Duplex Unit is used.
Duplex CPU Systems
No precautions in converting from
the CS1-H.
Transfer is possible for only program
file (.obj).
(No precautions in converting from
the CS1-H.)
No precautions in converting from
the CS1-H.
No precautions in converting from
the CS1-H.
Depends on PLC Setup settings.
(No precautions in converting from
the CS1-H.)
Pin 6 on CPU Unit DIP switch is
used.
(No precautions in converting from
the CS1-H.)
Single CPU Systems
---
Transfer is possible
for only program file
(.obj).
---
---
Depends on PLC
Setup settings.
Pin 6 on CPU Unit
DIP switch is used.
CS1-H (See note.)
Appendix E
571