CS1D-DPL02D Omron, CS1D-DPL02D Datasheet - Page 249

• Manufacturer Part Number: CS1D-DPL02D
• Description: CS1D Dual IO Exp
• Manufacturer: Omron

Specifications of CS1D-DPL02D

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Specific PLC Setup Settings
Duplex Settings
Operation Settings, Run under Duplex Initial
When an operation switching error occurs in the Active CPU Unit, the Standby CPU Unit will become
the Active CPU Unit and start operating.
214
123
125
Word
Word
Programming
Programming
Address in
Address in
Console
Console
14
13
Bit(s)
Bit(s)
0: Do not run during
initialization (start
running after initial-
ization
1: Start running dur-
ing initialization
Default: 0
0: No check (When
there is an error in
the Active CPU Unit
at startup, the
Standby CPU Unit
stays in standby sta-
tus.)
1: Check performed
(When there is an
error in the Active
CPU Unit at startup,
the Standby CPU
Unit becomes the
Active CPU Unit and
starts operating.)
Default: 0
Note
Settings
Settings
1. This setting can be used in all of the Duplex CPU Unit versions.
2. This setting can be selected with CX-Programmer version 6.1 or higher.
This setting determines where operation is
started while the duplex system is being ini-
tialized.
In Duplex Mode, duplex initialization starts
after the power supply is turned ON. Nor-
mally, operation will begin only after initial-
ization has been completed. This setting
can be used to start operation before initial-
ization has been completed. Use this setting
to reduce startup time when the power is
turned ON.
This setting determines whether the
Standby CPU Unit will become the Active
CPU Unit and starts operating if an error is
detected in the Duplex CPU Unit set as the
Active Unit when the power is turned ON.
This setting is enabled when the Duplex
system is set to Start under Duplex Initial.
Function
Function
---
---
flags and
flags and
Related
Related
words
words
Section 6-2
At startup
At startup
ting’s effec-
ting’s effec-
New set-
New set-
tiveness
tiveness