CS1D-DPL02D Omron, CS1D-DPL02D Datasheet - Page 475

• Manufacturer Part Number: CS1D-DPL02D
• Description: CS1D Dual IO Exp
• Manufacturer: Omron

Specifications of CS1D-DPL02D

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Online Replacement of I/O Units, Special I/O Units, and CPU Bus Units
11-4-2 Replacing More than One Unit at a Time
Starting Online
Replacement for
Multiple Units
Ending Replacement
of Multiple Units
440
EM_/EXT
EM_/EXT
CLR
*EM
*EM
FUN
5
3
The PLC Setup can be set to enable online replacement of more than one
Unit at a time.
This operation is possible only from the Programming Console.
Another Unit can be replaced after completing steps 1. to 5. in the basic pro-
cedure by pressing the CLR Key and then repeating steps 1. to 5., or by
pressing the EXT Key and then using the following procedure.
If the EXT Key is pressed in the status shown above, the display will appear to
enable inputting another rack number and slot number.
The following example shows the key inputs for replacing Units online in slot 4
or Rack 0, slot 5 in Rack 8, and slot 2 in Rack 3.
When the last Unit has been replaced and the online replacement procedure
for it has been completed, the replacement procedures for the remaining Units
can be ended either by pressing the CLR Key and then performing steps 1.
through 3. and then step 7. in the basic procedure, or by using the following
procedure to end the replacement procedures directly using step 7.
If the INS Key is pressed in the status shown above, the following displays will
appear allowing you to end the replacement procedures for all Units for which
replacement has been started.
SHIFT
8
2
SRCH
SRCH
*DM
CH
CF
CF
EM_/EXT
DEL
DEL
*EM
EM_/EXT
*EM
INS
INS
0
Replace Start
~5-8=I32
Replace?
Replace End
Replace End?
~0-4=O32
Replace End
Replace End?
~3-2=M96
?-?=
5-8=I32
0-4=O32
4
SRCH
CF
DEL
Section 11-4