CS1D-DPL02D Omron, CS1D-DPL02D Datasheet - Page 32

• Manufacturer Part Number: CS1D-DPL02D
• Description: CS1D Dual IO Exp
• Manufacturer: Omron

Specifications of CS1D-DPL02D

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

6
6-1
6-2
6-3
Conformance to EC Directives
Conformance to EC Directives
Applicable Directives
Concepts
Conformance to EC Directives
1,2,3...
Note Applicable EMC (Electromagnetic Compatibility) standards are as follows:
EMC Directives
OMRON devices that comply with EC Directives also conform to the related
EMC standards so that they can be more easily built into other devices or the
overall machine. The actual products have been checked for conformity to
EMC standards (see the following note). Whether the products conform to the
standards in the system used by the customer, however, must be checked by
the customer.
EMC-related performance of the OMRON devices that comply with EC Direc-
tives will vary depending on the configuration, wiring, and other conditions of
the equipment or control panel on which the OMRON devices are installed.
The customer must, therefore, perform the final check to confirm that devices
and the overall machine conform to EMC standards.
EMS (Electromagnetic Susceptibility):
EMI (Electromagnetic Interference):
Low Voltage Directive
Always ensure that devices operating at voltages of 50 to 1,000 V AC and 75
to 1,500 V DC meet the required safety standards for the PLC (EN61131-2).
The CS1D Duplex PLCs comply with EC Directives. To ensure that the
machine or device in which the CS1D Duplex PLC is used complies with EC
Directives, the PLC must be installed as follows:
1. The CS1D Duplex PLC must be installed within a control panel.
2. You must use reinforced insulation or double insulation for the DC power
3. CS1D Duplex PLCs complying with EC Directives also conform to the
• EMC Directives
• Low Voltage Directive
supplies used for the communications power supply and I/O power sup-
plies.
Common Emission Standard (EN61000-6-4). Radiated emission charac-
teristics (10-m regulations) may vary depending on the configuration of the
control panel used, other devices connected to the control panel, wiring,
and other conditions. You must therefore confirm that the overall machine
or equipment complies with EC Directives.
(Radiated emission: 10-m regulations)
EN61131-2 or EN61000-6-2
EN61000-6-4
xxxiii
6