CS1D-DPL02D Omron, CS1D-DPL02D Datasheet - Page 325

• Manufacturer Part Number: CS1D-DPL02D
• Description: CS1D Dual IO Exp
• Manufacturer: Omron

Specifications of CS1D-DPL02D

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

CPU Unit/Duplex Unit Setting
Initial Settings
CPU Bus Unit Flags/Bits
Special I/O Unit Flags/Bits
Inner Board Flags/Bits (Single CPU Systems or Process-control CPU Units)
290
Auxiliary Area
DIP Switch Setting Flag
I/O Response Times in Basic
I/O Units
Basic I/O Unit Information Bits A05000 to
CPU Bus Unit Initialization
Flags
CPU Bus Unit Restart Bits
Special I/O Unit Initialization
Flags
Special I/O Unit Restart Bits
Inner Board Monitoring Area
Inner Board Restart Bit
Inner Board User Interface
Area
Name
Name
Name
Name
Name
A39512
A22000 to
A25915
A08915
A30200 to
A30215
A50100 to
A50115
A33000 to
A33515
A50200 to
A50715
A35500 to
A35915
A60800
A60900 to
A61315
Address
Address
Address
Address
Address
Shows the ON/OFF status of the following switches depend-
ing on the system.
Duplex CPU Systems: Status of the “A39512” switch on the
DIP switch on the front of the Duplex Unit.
Single CPU Systems: Status of the pin 6 on the DIP switch
on the front of the CPU Unit.
Contains the current I/O response times for Basic I/O Units. Read-only
These flags correspond to slots 0 to 8 on Racks 0 to 7 in
order from slot 0 on Rack 0 to slot 8 on Rack 7. A flag will be
ON when the fuse is burnt out in a Basic I/O Unit mounted in
the corresponding slot.
These flags correspond to CPU Bus Units 0 to 15. A flag will
be ON while the corresponding Unit is initializing after the
power is turned ON or the Unit’s Restart Bit (A50100 to
A50115) is turned ON.
These bits correspond to CPU Bus Units 0 to 15. Turn a bit
from OFF to ON to restart the corresponding Unit.
Note: After a Unit restarts, its CPU Bus Unit Initialization
These flags correspond to Special I/O Units 0 to 95. A flag
will be ON while the corresponding Unit is initializing after
the power is turned ON or the Unit’s Restart Bit is turned
ON. (Restart Bits A50200 to A50715 correspond to Units 0
to 95.)
These bits correspond to Special I/O Units 0 to 95. Turn a bit
from OFF to ON to restart the corresponding Unit.
Note: After a Unit restarts, its Special I/O Unit Initialization
The function of these words is defined in the Inner Board.
Turn the bit from OFF to ON to restart the corresponding
Inner Board.
This interface area can be used to transfer data from the
CPU Unit to the Inner Board. The function of the data is
defined in the Inner Board.
Flag (in A302) will go ON and this bit will be turned
OFF by the system automatically after initialization.
Do not turn this bit OFF from a Programming Device
or the ladder program.
Flag (in A330 to A335) will go ON and this bit will be
turned OFF by the system automatically after initial-
ization. Do not turn this bit OFF from a Programming
Device or the ladder program.
Description
Description
Description
Description
Description
Section 8-11
Read-only
Read-only
Read-only
Read/write
Read-only
Read/write
Read-only
Read/write
Read/write
Access
Access
Access
Access
Access