CS1D-DPL02D Omron, CS1D-DPL02D Datasheet - Page 203

• Manufacturer Part Number: CS1D-DPL02D
• Description: CS1D Dual IO Exp
• Manufacturer: Omron

Specifications of CS1D-DPL02D

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Wiring Methods
AC Power Source
Voltage Selector
Isolating Transformer
Power Consumption
RUN Output
168
!Caution The Power Supply Unit will be damaged if 200 to 240 V AC power is supplied
Shorted: 100 to 120 V AC
Open:
Short-circuit the voltage selector terminals with the jumper bar to select 100 to
120 V AC supply voltage. For 200 to 240 V AC leave them open.
and the voltage selector terminals are connected with the jumper bar.
The PLC’s internal noise isolation circuits are sufficient to control typical noise
in power supply lines, but noise between the PLC and ground can be signifi-
cantly reduced by connecting a 1-to-1 isolating transformer. Do not ground the
secondary coil of the transformer.
The power consumption will be 150 VA max. per Rack, but there will be a
surge current determined by power supply specifications when power is
turned ON.
This output is ON whenever the CPU Unit is operating in RUN or MONITOR
mode; it is OFF when the CPU Unit is in PROGRAM mode or a fatal error has
occurred.
The RUN output can be used to control external systems, such as in an emer-
gency stop circuit that turns OFF the power supply to external systems when
the PLC is not operating. (See 5-1 Fail-safe Circuits for more details on the
emergency stop circuit.)
Contact form
Maximum switching
capacity
• Supply 100 to 120 V AC or 200 to 240 V AC.
• Keep voltage fluctuations within the specified range:
• If one power supply phase of the equipment is grounded, connect the
grounded phase side to the L2/N (or L1/N if so indicated) terminal.
100 to 120 V AC
200 to 240 V AC
Supply voltage
200 to 240 V AC
CS1D-PA207R
SPST-NO
240 V AC: 2 A for resistive loads
120 V AC: 0.5 A for inductive loads
24 V DC:
85 to 132 V AC
170 to 264 V AC
Allowable voltage fluctuations
2 A for resistive loads
2 A for inductive loads
Section 5-4