CS1D-DPL02D Omron, CS1D-DPL02D Datasheet - Page 211

• Manufacturer Part Number: CS1D-DPL02D
• Description: CS1D Dual IO Exp
• Manufacturer: Omron

Specifications of CS1D-DPL02D

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Wiring Methods
Terminal Blocks
5-4-3
Available Connectors
CS-series 32- and 64-point
I/O Units
176
Wiring CS-series Basic I/O Units with Connectors
Note
Note Solder-type connectors are included with each Unit.
The I/O Units are equipped with removable terminal blocks. The lead wires do
not have to be removed from the terminal block to remove it from an I/O Unit.
The terminal block can be removed by taking out the terminal block mounting
screws.
This section describes wiring CS-series Basic I/O Units with Connectors (32-,
64-, and 96-point Units). The user can combine a special connector with cable
or use a preassembled OMRON cable to connect a High-density I/O Unit to a
terminal block or I/O Terminal.
1. Be sure not to apply a voltage that exceeds the input voltage for Input Units
2. When the power supply has positive and negative terminals, be sure to
3. Use reinforced insulation or double insulation on the DC power supply con-
4. When connecting the connector to the I/O Unit, tighten the connector
5. Turn ON the power after checking the connector’s wiring.
6. Do not pull the cable. Doing so will damage the cable.
7. Bending the cable too sharply can damage or break wiring in the cable.
Use the following connectors when assembling a connector and cable.
The following connectors are recommended for attachment to CS-series 32-
and 64-point I/O Units.
Solder-type
(included with Unit)
Crimp-type
Crimp-type
CS1-series Basic I/O Units
or the maximum switching capacity for Output Units.
wire them correctly.
nected to DC I/O Units when required by EC Directives (low voltage).
screws to a torque of 0.2 N m.
Connection
40
40
40
Pins
Terminal block mounting screws
(black screws under cover)
C500-CE404
C500-CE405
C500-CE403
OMRON set
Socket: FCN-361J040-AU
Connector bar: FCN-360C040-J2
Socket: FCN-363J040
Connector bar: FCN-360C040-J2
Contacts: FCN-363J-AU
FCN-367J040-AU/F
Fujitsu parts
Section 5-4