CS1D-DPL02D Omron, CS1D-DPL02D Datasheet - Page 189

• Manufacturer Part Number: CS1D-DPL02D
• Description: CS1D Dual IO Exp
• Manufacturer: Omron

Specifications of CS1D-DPL02D

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Installation
5-2-2
154
Installation in a Control Panel
Note If the CS1D-PA207R Power Supply Unit is to be used at an ambient tempera-
ture of 50 C or higher, provide a minimum space of 80 mm between the top of
the Unit and any other objects, e.g., ceiling, wiring ducts, structural supports,
devices, etc.
80 mm min.
80 mm min.
80 mm min.
80 mm min.
• A typical installation is a CPU Rack mounted above an Expansion Rack
• The spacing between the CPU Rack and Expansion Rack (or between
• Up to 7 Expansion Racks can be connected.
• The mounting plate should be grounded completely and we recommend
• If all of the Racks cannot be mounted to the same mounting plate, the
on a mounting plate in the control panel.
two Expansion Racks) should be sufficient to allow space for a wiring
duct, wiring, air circulation, and replacement of Units in the Racks.
Each I/O Connecting Cable can be up to 12 m long, but the sum total of
all cables between the CPU Rack and Expansion Racks must be 12 m or
less.
using a mounting plate that has been plated with a good conductor to
improve noise resistance.
individual plates should be securely connected together using 3 wires of
at least 2 mm
2
in cross-sectional area.
Duct or other object
CS1D-PA207R
Duct or other object
CS1D-PA207R
Duct or other object
Section 5-2